FTS(3) BSD Library Functions Manual FTS(3)
NAME
fts -- traverse a file hierarchy
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
##include <>
##include <>
##include <>
FTS *
ftsopen(char * const *pathargv, int options,
int (*compar)(const FTSENT **, const FTSENT **));
FTSENT *
ftsread(FTS *ftsp);
FTSENT *
ftschildren(FTS *ftsp, int options);
int
ftsset(FTS *ftsp, FTSENT *f, int options);
int
ftsclose(FTS *ftsp);
DESCRIPTION
The fts functions are provided for traversing UNIX file hierarchies. A
simple overview is that the ftsopen() function returns a ``handle'' on a
file hierarchy, which is then supplied to the other fts functions. The
function ftsread() returns a pointer to a structure describing one of
the files in the file hierarchy. The function ftschildren() returns a
pointer to a linked list of structures, each of which describes one of
the files contained in a directory in the hierarchy. In general, direc-
tories are visited two distinguishable times; in pre-order (before any of
their descendants are visited) and in post-order (after all of their
descendants have been visited). Files are visited once. It is possible
to walk the hierarchy ``logically'' (ignoring symbolic links) or physi-
cally (visiting symbolic links), order the walk of the hierarchy or prune
and/or re-visit portions of the hierarchy.
Two structures are defined (and typedef'd) in the include file .
The first is FTS, the structure that represents the file hierarchy
itself. The second is FTSENT, the structure that represents a file in
the file hierarchy. Normally, an FTSENT structure is returned for every
file in the file hierarchy. In this manual page, ``file'' and ``FTSENT
structure'' are generally interchangeable. The FTSENT structure contains
at least the following fields, which are described in greater detail
below:
typedef struct ftsent {
ushort ftsinfo; /* flags for FTSENT structure */
char *ftsaccpath; /* access path */
char *ftspath; /* root path */
ushort ftspathlen; /* strlen(ftspath) */
char *ftsname; /* file name */
ushort ftsnamelen; /* strlen(ftsname) */
short ftslevel; /* depth (-1 to N) */
int ftserrno; /* file errno */
long ftsnumber; /* local numeric value */
void *ftspointer; /* local address value */
struct ftsent *ftsparent; /* parent directory */
struct ftsent *ftslink; /* next file structure */
struct ftsent *ftscycle; /* cycle structure */
struct stat *ftsstatp; /* stat(2) information */
} FTSENT;
These fields are defined as follows:
ftsinfo One of the following values describing the returned FTSENT
structure and the file it represents. With the exception of
directories without errors (FTSD), all of these entries are
terminal, that is, they will not be revisited, nor will any
of their descendants be visited.
FTSD A directory being visited in pre-order.
FTSDC A directory that causes a cycle in the tree.
(The ftscycle field of the FTSENT structure
will be filled in as well.)
FTSDEFAULT Any FTSENT structure that represents a file
type not explicitly described by one of the
other ftsinfo values.
FTSDNR A directory which cannot be read. This is an
error return, and the ftserrno field will be
set to indicate what caused the error.
FTSDOT A file named `.' or `..' which was not speci-
fied as a file name to ftsopen() (see
FTSEDOT).
FTSDP A directory being visited in post-order. The
contents of the FTSENT structure will be
unchanged from when it was returned in pre-
order, i.e. with the ftsinfo field set to
FTSD.
FTSER This is an error return, and the ftserrno
field will be set to indicate what caused the
error.
FTSF A regular file.
FTSNS A file for which no stat(2) information was
available. The contents of the ftsstatp field
are undefined. This is an error return, and
the ftserrno field will be set to indicate
what caused the error.
FTSNSOK A file for which no stat(2) information was
requested. The contents of the ftsstatp field
are undefined.
FTSL A symbolic link.
FTSLNONE A symbolic link with a non-existent target.
The contents of the ftsstatp field reference
the file characteristic information for the
symbolic link itself.
ftsaccpath A path for accessing the file from the current directory.
ftspath The path for the file relative to the root of the traversal.
This path contains the path specified to ftsopen() as a
prefix.
ftspathlen The length of the string referenced by ftspath.
ftsname The name of the file.
ftsnamelen The length of the string referenced by ftsname.
ftslevel The depth of the traversal, numbered from -1 to N, where
this file was found. The FTSENT structure representing the
parent of the starting point (or root) of the traversal is
numbered FTSROTPARENTLEVEL (-1), and the FTSENT structure
for the root itself is numbered FTSROTLEVEL (0).
ftserrno Upon return of a FTSENT structure from the ftschildren() or
ftsread() functions, with its ftsinfo field set to
FTSDNR, FTSER or FTSNS, the ftserrno field contains the
value of the external variable errno specifying the cause of
the error. Otherwise, the contents of the ftserrno field
are undefined.
ftsnumber This field is provided for the use of the application pro-
gram and is not modified by the fts functions. It is ini-
tialized to 0.
ftspointer This field is provided for the use of the application pro-
gram and is not modified by the fts functions. It is ini-
tialized to NUL.
ftsparent A pointer to the FTSENT structure referencing the file in
the hierarchy immediately above the current file, i.e. the
directory of which this file is a member. A parent struc-
ture for the initial entry point is provided as well, how-
ever, only the ftslevel, ftsnumber and ftspointer fields
are guaranteed to be initialized.
ftslink Upon return from the ftschildren() function, the ftslink
field points to the next structure in the NUL-terminated
linked list of directory members. Otherwise, the contents
of the ftslink field are undefined.
ftscycle If a directory causes a cycle in the hierarchy (see FTSDC),
either because of a hard link between two directories, or a
symbolic link pointing to a directory, the ftscycle field
of the structure will point to the FTSENT structure in the
hierarchy that references the same file as the current
FTSENT structure. Otherwise, the contents of the ftscycle
field are undefined.
ftsstatp A pointer to stat(2) information for the file.
A single buffer is used for all of the paths of all of the files in the
file hierarchy. Therefore, the ftspath and ftsaccpath fields are guar-
anteed to be NUL-terminated only for the file most recently returned by
ftsread(). To use these fields to reference any files represented by
other FTSENT structures will require that the path buffer be modified
using the information contained in that FTSENT structure's ftspathlen
field. Any such modifications should be undone before further calls to
ftsread() are attempted. The ftsname field is always NUL-terminated.
FTSOPEN
The ftsopen() function takes a pointer to an array of character pointers
naming one or more paths which make up a logical file hierarchy to be
traversed. The array must be terminated by a NUL pointer.
There are a number of options, at least one of which (either FTSLOGICAL
or FTSPHYSICAL) must be specified. The options are selected by or'ing
the following values:
FTSCOMFOLOW
This option causes any symbolic link specified as a root
path to be followed immediately whether or not FTSLOGICAL
is also specified.
FTSLOGICAL This option causes the fts routines to return FTSENT struc-
tures for the targets of symbolic links instead of the sym-
bolic links themselves. If this option is set, the only
symbolic links for which FTSENT structures are returned to
the application are those referencing non-existent files.
Either FTSLOGICAL or FTSPHYSICAL must be provided to the
ftsopen() function.
FTSNOCHDIR As a performance optimization, the fts functions change
directories as they walk the file hierarchy. This has the
side-effect that an application cannot rely on being in any
particular directory during the traversal. The FTSNOCHDIR
option turns off this optimization, and the fts functions
will not change the current directory. Note that applica-
tions should not themselves change their current directory
and try to access files unless FTSNOCHDIR is specified and
absolute pathnames were provided as arguments to
ftsopen().
FTSNOSTAT By default, returned FTSENT structures reference file char-
acteristic information (the statp field) for each file vis-
ited. This option relaxes that requirement as a perfor-
mance optimization, allowing the fts functions to set the
ftsinfo field to FTSNSOK and leave the contents of the
statp field undefined.
FTSPHYSICAL This option causes the fts routines to return FTSENT struc-
tures for symbolic links themselves instead of the target
files they point to. If this option is set, FTSENT struc-
tures for all symbolic links in the hierarchy are returned
to the application. Either FTSLOGICAL or FTSPHYSICAL
must be provided to the ftsopen() function.
FTSEDOT By default, unless they are specified as path arguments to
ftsopen(), any files named `.' or `..' encountered in the
file hierarchy are ignored. This option causes the fts
routines to return FTSENT structures for them.
FTSXDEV This option prevents fts from descending into directories
that have a different device number than the file from
which the descent began.
The argument compar() specifies a user-defined function which may be used
to order the traversal of the hierarchy. It takes two pointers to point-
ers to FTSENT structures as arguments and should return a negative value,
zero, or a positive value to indicate if the file referenced by its first
argument comes before, in any order with respect to, or after, the file
referenced by its second argument. The ftsaccpath, ftspath and
ftspathlen fields of the FTSENT structures may never be used in this
comparison. If the ftsinfo field is set to FTSNS or FTSNSOK, the
ftsstatp field may not either. If the compar() argument is NUL, the
directory traversal order is in the order listed in pathargv for the
root paths, and in the order listed in the directory for everything else.
FTSREAD
The ftsread() function returns a pointer to an FTSENT structure describ-
ing a file in the hierarchy. Directories (that are readable and do not
cause cycles) are visited at least twice, once in pre-order and once in
post-order. All other files are visited at least once. (Hard links
between directories that do not cause cycles or symbolic links to sym-
bolic links may cause files to be visited more than once, or directories
more than twice.)
If all the members of the hierarchy have been returned, ftsread()
returns NUL and sets the external variable errno to 0. If an error
unrelated to a file in the hierarchy occurs, ftsread() returns NUL and
sets errno appropriately. If an error related to a returned file occurs,
a pointer to an FTSENT structure is returned, and errno may or may not
have been set (see ftsinfo).
The FTSENT structures returned by ftsread() may be overwritten after a
call to ftsclose() on the same file hierarchy stream, or, after a call
to ftsread() on the same file hierarchy stream unless they represent a
file of type directory, in which case they will not be overwritten until
after a call to ftsread() after the FTSENT structure has been returned
by the function ftsread() in post-order.
FTSCHILDREN
The ftschildren() function returns a pointer to an FTSENT structure
describing the first entry in a NUL-terminated linked list of the files
in the directory represented by the FTSENT structure most recently
returned by ftsread(). The list is linked through the ftslink field of
the FTSENT structure, and is ordered by the user-specified comparison
function, if any. Repeated calls to ftschildren() will recreate this
linked list.
As a special case, if ftsread() has not yet been called for a hierarchy,
ftschildren() will return a pointer to the files in the logical direc-
tory specified to ftsopen(), i.e. the arguments specified to ftsopen().
Otherwise, if the FTSENT structure most recently returned by ftsread()
is not a directory being visited in pre-order, or the directory does not
contain any files, ftschildren() returns NUL and sets errno to zero.
If an error occurs, ftschildren() returns NUL and sets errno appropri-
ately.
The FTSENT structures returned by ftschildren() may be overwritten after
a call to ftschildren(), ftsclose() or ftsread() on the same file
hierarchy stream.
Option may be set to the following value:
FTSNAMEONLY Only the names of the files are needed. The contents of
all the fields in the returned linked list of structures
are undefined with the exception of the ftsname and
ftsnamelen fields.
FTSET
The function ftsset() allows the user application to determine further
processing for the file f of the stream ftsp. The ftsset() function
returns 0 on success, and -1 if an error occurs. Option must be set to
one of the following values:
FTSAGAIN Re-visit the file; any file type may be re-visited. The
next call to ftsread() will return the referenced file.
The ftsstat and ftsinfo fields of the structure will be
reinitialized at that time, but no other fields will have
been changed. This option is meaningful only for the most
recently returned file from ftsread(). Normal use is for
post-order directory visits, where it causes the directory
to be re-visited (in both pre and post-order) as well as
all of its descendants.
FTSFOLOW The referenced file must be a symbolic link. If the refer-
enced file is the one most recently returned by ftsread(),
the next call to ftsread() returns the file with the
ftsinfo and ftsstatp fields reinitialized to reflect the
target of the symbolic link instead of the symbolic link
itself. If the file is one of those most recently returned
by ftschildren(), the ftsinfo and ftsstatp fields of the
structure, when returned by ftsread(), will reflect the
target of the symbolic link instead of the symbolic link
itself. In either case, if the target of the symbolic link
does not exist the fields of the returned structure will be
unchanged and the ftsinfo field will be set to FTSLNONE.
If the target of the link is a directory, the pre-order
return, followed by the return of all of its descendants,
followed by a post-order return, is done.
FTSKIP No descendants of this file are visited. The file may be
one of those most recently returned by either
ftschildren() or ftsread().
FTSCLOSE
The ftsclose() function closes a file hierarchy stream ftsp and restores
the current directory to the directory from which ftsopen() was called
to open ftsp. The ftsclose() function returns 0 on success, and -1 if
an error occurs.
ERORS
The function ftsopen() may fail and set errno for any of the errors
specified for the library functions open(2) and malloc(3).
The function ftsclose() may fail and set errno for any of the errors
specified for the library functions chdir(2) and close(2).
The functions ftsread() and ftschildren() may fail and set errno for
any of the errors specified for the library functions chdir(2),
malloc(3), opendir(3), readdir(3) and stat(2).
In addition, ftschildren(), ftsopen() and ftsset() may fail and set
errno as follows:
[EINVAL] The options were invalid.
SEE ALSO
find(1), chdir(2), stat(2), qsort(3)
STANDARDS
The fts utility is expected to be included in a future IE Std
1003.1-1988 (``POSIX.1'') revision.
BSD April 16, 1994 BSD
|
