SG3UTILS                                             SGRTPG(1M)



NAME
     sgrtpg - sends a SCSI REPORT TARGET PORT GROUPS command

SYNOPSIS
     sgrtpg  [--decode]  [--help]  [--hex]  [--raw]  [--verbose]
     [--version] DEVICE

DESCRIPTION
     Send a SCSI REPORT TARGET PORT GROUPS command to DEVICE  and
     outputs the response.

     Target port group access is  described  in  SPC-3  found  at
     www.t10.org in section 5.8 (in rev 21c dated 2005/1/15). The
     Report Target Port Groups command is also described in  that
     document.

OPTIONS
     Arguments to long options are mandatory for short options as
     well.

     -d, --decode
          decodes the status code  and  asymmetric  access  state
          from  each  target  port group descriptor returned. The
          default action is not to decode these values.

     -h, --help
          output the usage message then exit.

     -H, --hex
          output response in hex (rather than partially or  fully
          decode it).

     -r, --raw
          output response in binary to stdout.

     -v, --verbose
          increase the level of verbosity, (i.e. debug output).

     -V, --version
          print the version string and then exit.

NOTES
     The Report Target Port Groups command  should  be  supported
     whenever  the  TPGS  bits in a standard INQUIRY response are
     greater than zero. [View with sginq utility.]

EXIT STATUS
     The exit status of sgrtpg is 0 when it is successful.  Oth-
     erwise see the sg3utils(1M) man page.

AUTHORS
     Written by Douglas Gilbert.



sg3utils-1.23      Last change: January 2007                   1






SG3UTILS                                             SGRTPG(1M)



REPORTING BUGS
     Report bugs to .

COPYRIGHT
     Copyright O 2004-2007 Christophe Varoqui and Douglas Gilbert
     This software is distributed under a FreeBSD license.  There
     is  NO warranty; not even for MERCHANTABILITY or FITNES FOR
     A PARTICULAR PURPOSE.

SEE ALSO
     sginq(sg3utils)

ATRIBUTES
     See attributes(5) for descriptions of the  following  attri-
     butes:

     
       ATRIBUTE TYPE     ATRIBUTE VALUE
    
     Availability         SUNWsg3utilsu  
    
     Interface Stability  Committed      
    

NOTES
     Source for sg3utils is available on http:/opensolaris.org.





























sg3utils-1.23      Last change: January 2007                   2