System Administration Commands                         sysdef(1M)



NAME
     sysdef - output system definition

SYNOPSIS
     /usr/sbin/sysdef [-i] [-n namelist]


     /usr/sbin/sysdef [-h] [-d] [-i] [-D]


DESCRIPTION
     The sysdef utility outputs the current system definition  in
     tabular  form.  It  lists  all  hardware devices, as well as
     pseudo devices, system devices, loadable  modules,  and  the
     values of selected kernel tunable parameters.


     It generates the output  by  analyzing  the  named  bootable
     operating  system  file (namelist) and extracting the confi-
     guration information from it.


     The default system namelist is /dev/kmem.

OPTIONS
     -i             Prints  the  configuration  information  from
                    /dev/kmem. This is the default and only needs
                    to be specified if the configuration informa-
                    tion  from both /dev/kmem and the system file
                    specified with the "-n  namelist"  option  is
                    needed.


     -n namelist    Specifies a namelist other than  the  default
                    (/dev/kmem). The namelist specified must be a
                    valid bootable operating system.


     -h             Prints the identifier of the current host  in
                    hexadecimal. If sysdef -h is executed  within
                    a non-global zone and  the  zone  emulates  a
                    host  identifier,  then the zone's host iden-
                    tifier is printed. This numeric value is  not
                    guaranteed to be unique.


     -d             The output includes the configuration of sys-
                    tem peripherals formatted as a device tree.


     -D             For each  system  peripheral  in  the  device
                    tree,  display  the name of the device driver



SunOS 5.11          Last change: 25 Feb 2009                    1






System Administration Commands                         sysdef(1M)



                    used to manage the peripheral.


EXAMPLES
     Example 1 Sample output format


     The following example displays the format of the  sysdef  -d
     output:


       example% sysdef -d
       Node 'SUNW,Ultra-510', unit #-1
           Node 'packages', unit #-1 (no driver)
               Node 'terminal-emulator', unit #-1 (no driver)
               Node 'deblocker', unit #-1 (no driver)
               Node 'obp-tftp', unit #-1 (no driver)
               Node 'disk-label', unit #-1 (no driver)
               Node 'SUNW,builtin-drivers', unit #-1 (no driver)
               Node 'sun-keyboard', unit #-1 (no driver)
               Node 'ufs-file-system', unit #-1 (no driver)
           Node 'chosen', unit #-1 (no driver)
           Node 'openprom', unit #-1 (no driver)
               Node 'client-services', unit #-1 (no driver)
           Node 'options', unit #0
           Node 'aliases', unit #-1 (no driver)
           Node 'memory', unit #-1 (no driver)
           Node 'virtual-memory', unit #-1 (no driver)
           Node 'pci', unit #0
               Node 'pci', unit #0
                   Node 'ebus', unit #0
                       Node 'auxio', unit #-1 (no driver)
                       Node 'power', unit #0
                       Node 'SUNW,pll', unit #-1 (no driver)
                       Node 'se', unit #0 (no driver)
                       Node 'su', unit #0
                       Node 'su', unit #1
                       Node 'ecpp', unit #-1 (no driver)
                       Node 'fdthree', unit #0
                       Node 'eeprom', unit #-1 (no driver)
                       Node 'flashprom', unit #-1 (no driver)
                       Node 'SUNW,CS4231', unit #0 (no driver)
                   Node 'network', unit #0
                   Node 'SUNW,m64B', unit #0
                   Node 'ide', unit #0
                       Node 'disk', unit #-1 (no driver)
                       Node 'cdrom', unit #-1 (no driver)
                       Node 'sd', unit #1
                       Node 'dad', unit #1
               Node 'pci', unit #-1 (no driver)
           Node 'SUNW,UltraSPARC-Ii', unit #-1 (no driver)
           Node 'pseudo', unit #0



SunOS 5.11          Last change: 25 Feb 2009                    2






System Administration Commands                         sysdef(1M)



       [output truncated]



FILES
     /dev/kmem    default operating system image


ATRIBUTES
     See attributes(5) for descriptions of the  following  attri-
     butes:



     
           ATRIBUTE TYPE               ATRIBUTE VALUE       
    
     Availability                 SUNWcsu                     
    


SEE ALSO
     hostid(1), prtconf(1M), nlist(3ELF), attributes(5), zones(5)
































SunOS 5.11          Last change: 25 Feb 2009                    3