GNU Wget WGET(1)
NAME
Wget - The non-interactive network downloader.
SYNOPSIS
wget [option]... [URL]...
DESCRIPTION
GNU Wget is a free utility for non-interactive download of
files from the Web. It supports HTP, HTPS, and FTP
protocols, as well as retrieval through HTP proxies.
Wget is non-interactive, meaning that it can work in the
background, while the user is not logged on. This allows
you to start a retrieval and disconnect from the system,
letting Wget finish the work. By contrast, most of the Web
browsers require constant user's presence, which can be a
great hindrance when transferring a lot of data.
Wget can follow links in HTML and XHTML pages and create
local versions of remote web sites, fully recreating the
directory structure of the original site. This is sometimes
referred to as ``recursive downloading.'' While doing that,
Wget respects the Robot Exclusion Standard (/robots.txt).
Wget can be instructed to convert the links in downloaded
HTML files to the local files for offline viewing.
Wget has been designed for robustness over slow or unstable
network connections; if a download fails due to a network
problem, it will keep retrying until the whole file has been
retrieved. If the server supports regetting, it will
instruct the server to continue the download from where it
left off.
OPTIONS
Option Syntax
Since Wget uses GNU getopt to process command-line
arguments, every option has a long form along with the short
one. Long options are more convenient to remember, but take
time to type. You may freely mix different option styles,
or specify options after the command-line arguments. Thus
you may write:
wget -r --tries=10 http:/fly.srk.fer.hr/ -o log
The space between the option accepting an argument and the
argument may be omitted. Instead -o log you can write
-olog.
You may put several options that do not require arguments
together, like:
GNU Wget 1.10.2 Last change: 2009-04-08 1
GNU Wget WGET(1)
wget -drc
This is a complete equivalent of:
wget -d -r -c
Since the options can be specified after the arguments, you
may terminate them with --. So the following will try to
download URL -x, reporting failure to log:
wget -o log -- -x
The options that accept comma-separated lists all respect
the convention that specifying an empty list clears its
value. This can be useful to clear the .wgetrc settings.
For instance, if your .wgetrc sets "excludedirectories" to
/cgi-bin, the following example will first reset it, and
then set it to exclude /~nobody and /~somebody. You can
also clear the lists in .wgetrc.
wget -X '' -X /~nobody,/~somebody
Most options that do not accept arguments are boolean
options, so named because their state can be captured with a
yes-or-no (``boolean'') variable. For example, --follow-ftp
tells Wget to follow FTP links from HTML files and, on the
other hand, --no-glob tells it not to perform file globbing
on FTP URLs. A boolean option is either affirmative or
negative (beginning with --no). All such options share
several properties.
Unless stated otherwise, it is assumed that the default
behavior is the opposite of what the option accomplishes.
For example, the documented existence of --follow-ftp
assumes that the default is to not follow FTP links from
HTML pages.
Affirmative options can be negated by prepending the --no-
to the option name; negative options can be negated by
omitting the --no- prefix. This might seem superfluous---if
the default for an affirmative option is to not do
something, then why provide a way to explicitly turn it off?
But the startup file may in fact change the default. For
instance, using "followftp = off" in .wgetrc makes Wget not
follow FTP links by default, and using --no-follow-ftp is
the only way to restore the factory default from the command
line.
Basic Startup Options
-V
--version
GNU Wget 1.10.2 Last change: 2009-04-08 2
GNU Wget WGET(1)
Display the version of Wget.
-h
--help
Print a help message describing all of Wget's command-
line options.
-b
--background
Go to background immediately after startup. If no
output file is specified via the -o, output is
redirected to wget-log.
-e command
--execute command
Execute command as if it were a part of .wgetrc. A
command thus invoked will be executed after the commands
in .wgetrc, thus taking precedence over them. If you
need to specify more than one wgetrc command, use
multiple instances of -e.
Logging and Input File Options
-o logfile
--output-file=logfile
Log all messages to logfile. The messages are normally
reported to standard error.
-a logfile
--append-output=logfile
Append to logfile. This is the same as -o, only it
appends to logfile instead of overwriting the old log
file. If logfile does not exist, a new file is created.
-d
--debug
Turn on debug output, meaning various information
important to the developers of Wget if it does not work
properly. Your system administrator may have chosen to
compile Wget without debug support, in which case -d
will not work. Please note that compiling with debug
support is always safe---Wget compiled with the debug
support will not print any debug info unless requested
with -d.
-q
--quiet
Turn off Wget's output.
-v
--verbose
Turn on verbose output, with all the available data.
GNU Wget 1.10.2 Last change: 2009-04-08 3
GNU Wget WGET(1)
The default output is verbose.
-nv
--no-verbose
Turn off verbose without being completely quiet (use -q
for that), which means that error messages and basic
information still get printed.
-i file
--input-file=file
Read URLs from file. If - is specified as file, URLs
are read from the standard input. (Use ./- to read from
a file literally named -.)
If this function is used, no URLs need be present on the
command line. If there are URLs both on the command
line and in an input file, those on the command lines
will be the first ones to be retrieved. The file need
not be an HTML document (but no harm if it is)---it is
enough if the URLs are just listed sequentially.
However, if you specify --force-html, the document will
be regarded as html. In that case you may have problems
with relative links, which you can solve either by
adding "" to the documents or by
specifying --base=url on the command line.
-F
--force-html
When input is read from a file, force it to be treated
as an HTML file. This enables you to retrieve relative
links from existing HTML files on your local disk, by
adding "" to HTML, or using the --base
command-line option.
-B URL
--base=URL
Prepends URL to relative links read from the file
specified with the -i option.
Download Options
--bind-address=ADRES
When making client TCP/IP connections, bind to ADRES
on the local machine. ADRES may be specified as a
hostname or IP address. This option can be useful if
your machine is bound to multiple IPs.
-t number
--tries=number
Set number of retries to number. Specify 0 or inf for
infinite retrying. The default is to retry 20 times,
GNU Wget 1.10.2 Last change: 2009-04-08 4
GNU Wget WGET(1)
with the exception of fatal errors like ``connection
refused'' or ``not found'' (404), which are not retried.
-O file
--output-document=file
The documents will not be written to the appropriate
files, but all will be concatenated together and written
to file. If - is used as file, documents will be
printed to standard output, disabling link conversion.
(Use ./- to print to a file literally named -.)
Note that a combination with -k is only well-defined for
downloading a single document.
-nc
--no-clobber
If a file is downloaded more than once in the same
directory, Wget's behavior depends on a few options,
including -nc. In certain cases, the local file will be
clobbered, or overwritten, upon repeated download. In
other cases it will be preserved.
When running Wget without -N, -nc, or -r, downloading
the same file in the same directory will result in the
original copy of file being preserved and the second
copy being named file.1. If that file is downloaded yet
again, the third copy will be named file.2, and so on.
When -nc is specified, this behavior is suppressed, and
Wget will refuse to download newer copies of file.
Therefore, ``"no-clobber"'' is actually a misnomer in
this mode---it's not clobbering that's prevented (as the
numeric suffixes were already preventing clobbering),
but rather the multiple version saving that's prevented.
When running Wget with -r, but without -N or -nc, re-
downloading a file will result in the new copy simply
overwriting the old. Adding -nc will prevent this
behavior, instead causing the original version to be
preserved and any newer copies on the server to be
ignored.
When running Wget with -N, with or without -r, the
decision as to whether or not to download a newer copy
of a file depends on the local and remote timestamp and
size of the file. -nc may not be specified at the same
time as -N.
Note that when -nc is specified, files with the suffixes
.html or .htm will be loaded from the local disk and
parsed as if they had been retrieved from the Web.
-c
GNU Wget 1.10.2 Last change: 2009-04-08 5
GNU Wget WGET(1)
--continue
Continue getting a partially-downloaded file. This is
useful when you want to finish up a download started by
a previous instance of Wget, or by another program. For
instance:
wget -c ftp:/sunsite.doc.ic.ac.uk/ls-lR.Z
If there is a file named ls-lR.Z in the current
directory, Wget will assume that it is the first portion
of the remote file, and will ask the server to continue
the retrieval from an offset equal to the length of the
local file.
Note that you don't need to specify this option if you
just want the current invocation of Wget to retry
downloading a file should the connection be lost midway
through. This is the default behavior. -c only affects
resumption of downloads started prior to this invocation
of Wget, and whose local files are still sitting around.
Without -c, the previous example would just download the
remote file to ls-lR.Z.1, leaving the truncated ls-lR.Z
file alone.
Beginning with Wget 1.7, if you use -c on a non-empty
file, and it turns out that the server does not support
continued downloading, Wget will refuse to start the
download from scratch, which would effectively ruin
existing contents. If you really want the download to
start from scratch, remove the file.
Also beginning with Wget 1.7, if you use -c on a file
which is of equal size as the one on the server, Wget
will refuse to download the file and print an
explanatory message. The same happens when the file is
smaller on the server than locally (presumably because
it was changed on the server since your last download
attempt)---because ``continuing'' is not meaningful, no
download occurs.
On the other side of the coin, while using -c, any file
that's bigger on the server than locally will be
considered an incomplete download and only
"(length(remote) - length(local))" bytes will be
downloaded and tacked onto the end of the local file.
This behavior can be desirable in certain cases---for
instance, you can use wget -c to download just the new
portion that's been appended to a data collection or log
file.
However, if the file is bigger on the server because
GNU Wget 1.10.2 Last change: 2009-04-08 6
GNU Wget WGET(1)
it's been changed, as opposed to just appended to,
you'll end up with a garbled file. Wget has no way of
verifying that the local file is really a valid prefix
of the remote file. You need to be especially careful
of this when using -c in conjunction with -r, since
every file will be considered as an "incomplete
download" candidate.
Another instance where you'll get a garbled file if you
try to use -c is if you have a lame HTP proxy that
inserts a ``transfer interrupted'' string into the local
file. In the future a ``rollback'' option may be added
to deal with this case.
Note that -c only works with FTP servers and with HTP
servers that support the "Range" header.
--progress=type
Select the type of the progress indicator you wish to
use. Legal indicators are ``dot'' and ``bar''.
The ``bar'' indicator is used by default. It draws an
ASCI progress bar graphics (a.k.a ``thermometer''
display) indicating the status of retrieval. If the
output is not a TY, the ``dot'' bar will be used by
default.
Use --progress=dot to switch to the ``dot'' display. It
traces the retrieval by printing dots on the screen,
each dot representing a fixed amount of downloaded data.
When using the dotted retrieval, you may also set the
style by specifying the type as dot:style. Different
styles assign different meaning to one dot. With the
"default" style each dot represents 1K, there are ten
dots in a cluster and 50 dots in a line. The "binary"
style has a more ``computer''-like orientation---8K
dots, 16-dots clusters and 48 dots per line (which makes
for 384K lines). The "mega" style is suitable for
downloading very large files---each dot represents 64K
retrieved, there are eight dots in a cluster, and 48
dots on each line (so each line contains 3M).
Note that you can set the default style using the
"progress" command in .wgetrc. That setting may be
overridden from the command line. The exception is
that, when the output is not a TY, the ``dot'' progress
will be favored over ``bar''. To force the bar output,
use --progress=bar:force.
-N
--timestamping
GNU Wget 1.10.2 Last change: 2009-04-08 7
GNU Wget WGET(1)
Turn on time-stamping.
-S
--server-response
Print the headers sent by HTP servers and responses
sent by FTP servers.
--spider
When invoked with this option, Wget will behave as a Web
spider, which means that it will not download the pages,
just check that they are there. For example, you can
use Wget to check your bookmarks:
wget --spider --force-html -i bookmarks.html
This feature needs much more work for Wget to get close
to the functionality of real web spiders.
-T seconds
--timeout=seconds
Set the network timeout to seconds seconds. This is
equivalent to specifying --dns-timeout,
--connect-timeout, and --read-timeout, all at the same
time.
When interacting with the network, Wget can check for
timeout and abort the operation if it takes too long.
This prevents anomalies like hanging reads and infinite
connects. The only timeout enabled by default is a
900-second read timeout. Setting a timeout to 0
disables it altogether. Unless you know what you are
doing, it is best not to change the default timeout
settings.
All timeout-related options accept decimal values, as
well as subsecond values. For example, 0.1 seconds is a
legal (though unwise) choice of timeout. Subsecond
timeouts are useful for checking server response times
or for testing network latency.
--dns-timeout=seconds
Set the DNS lookup timeout to seconds seconds. DNS
lookups that don't complete within the specified time
will fail. By default, there is no timeout on DNS
lookups, other than that implemented by system
libraries.
--connect-timeout=seconds
Set the connect timeout to seconds seconds. TCP
connections that take longer to establish will be
aborted. By default, there is no connect timeout, other
than that implemented by system libraries.
GNU Wget 1.10.2 Last change: 2009-04-08 8
GNU Wget WGET(1)
--read-timeout=seconds
Set the read (and write) timeout to seconds seconds.
The ``time'' of this timeout refers idle time: if, at
any point in the download, no data is received for more
than the specified number of seconds, reading fails and
the download is restarted. This option does not
directly affect the duration of the entire download.
Of course, the remote server may choose to terminate the
connection sooner than this option requires. The
default read timeout is 900 seconds.
--limit-rate=amount
Limit the download speed to amount bytes per second.
Amount may be expressed in bytes, kilobytes with the k
suffix, or megabytes with the m suffix. For example,
--limit-rate=20k will limit the retrieval rate to
20KB/s. This is useful when, for whatever reason, you
don't want Wget to consume the entire available
bandwidth.
This option allows the use of decimal numbers, usually
in conjunction with power suffixes; for example,
--limit-rate=2.5k is a legal value.
Note that Wget implements the limiting by sleeping the
appropriate amount of time after a network read that
took less time than specified by the rate. Eventually
this strategy causes the TCP transfer to slow down to
approximately the specified rate. However, it may take
some time for this balance to be achieved, so don't be
surprised if limiting the rate doesn't work well with
very small files.
-w seconds
--wait=seconds
Wait the specified number of seconds between the
retrievals. Use of this option is recommended, as it
lightens the server load by making the requests less
frequent. Instead of in seconds, the time can be
specified in minutes using the "m" suffix, in hours
using "h" suffix, or in days using "d" suffix.
Specifying a large value for this option is useful if
the network or the destination host is down, so that
Wget can wait long enough to reasonably expect the
network error to be fixed before the retry.
--waitretry=seconds
If you don't want Wget to wait between every retrieval,
but only between retries of failed downloads, you can
use this option. Wget will use linear backoff, waiting
GNU Wget 1.10.2 Last change: 2009-04-08 9
GNU Wget WGET(1)
1 second after the first failure on a given file, then
waiting 2 seconds after the second failure on that file,
up to the maximum number of seconds you specify.
Therefore, a value of 10 will actually make Wget wait up
to (1 ] 2 ] ... ] 10) = 55 seconds per file.
Note that this option is turned on by default in the
global wgetrc file.
--random-wait
Some web sites may perform log analysis to identify
retrieval programs such as Wget by looking for
statistically significant similarities in the time
between requests. This option causes the time between
requests to vary between 0 and 2 * wait seconds, where
wait was specified using the --wait option, in order to
mask Wget's presence from such analysis.
A recent article in a publication devoted to development
on a popular consumer platform provided code to perform
this analysis on the fly. Its author suggested blocking
at the class C address level to ensure automated
retrieval programs were blocked despite changing DHCP-
supplied addresses.
The --random-wait option was inspired by this ill-
advised recommendation to block many unrelated users
from a web site due to the actions of one.
--no-proxy
Don't use proxies, even if the appropriate *proxy
environment variable is defined.
For more information about the use of proxies with Wget,
-Q quota
--quota=quota
Specify download quota for automatic retrievals. The
value can be specified in bytes (default), kilobytes
(with k suffix), or megabytes (with m suffix).
Note that quota will never affect downloading a single
file. So if you specify wget -Q10k
ftp:/wuarchive.wustl.edu/ls-lR.gz, all of the ls-lR.gz
will be downloaded. The same goes even when several
URLs are specified on the command-line. However, quota
is respected when retrieving either recursively, or from
an input file. Thus you may safely type wget -Q2m -i
sites---download will be aborted when the quota is
exceeded.
Setting quota to 0 or to inf unlimits the download
GNU Wget 1.10.2 Last change: 2009-04-08 10
GNU Wget WGET(1)
quota.
--no-dns-cache
Turn off caching of DNS lookups. Normally, Wget
remembers the IP addresses it looked up from DNS so it
doesn't have to repeatedly contact the DNS server for
the same (typically small) set of hosts it retrieves
from. This cache exists in memory only; a new Wget run
will contact DNS again.
However, it has been reported that in some situations it
is not desirable to cache host names, even for the
duration of a short-running application like Wget. With
this option Wget issues a new DNS lookup (more
precisely, a new call to "gethostbyname" or
"getaddrinfo") each time it makes a new connection.
Please note that this option will not affect caching
that might be performed by the resolving library or by
an external caching layer, such as NSCD.
If you don't understand exactly what this option does,
you probably won't need it.
--restrict-file-names=mode
Change which characters found in remote URLs may show up
in local file names generated from those URLs.
Characters that are restricted by this option are
escaped, i.e. replaced with %H, where H is the
hexadecimal number that corresponds to the restricted
character.
By default, Wget escapes the characters that are not
valid as part of file names on your operating system, as
well as control characters that are typically
unprintable. This option is useful for changing these
defaults, either because you are downloading to a non-
native partition, or because you want to disable
escaping of the control characters.
When mode is set to ``unix'', Wget escapes the character
/ and the control characters in the ranges 0--31 and
128--159. This is the default on Unix-like OS'es.
When mode is set to ``windows'', Wget escapes the
characters \, , /, :, ?, ", *, <, >, and the control
characters in the ranges 0--31 and 128--159. In
addition to this, Wget in Windows mode uses ] instead of
: to separate host and port in local file names, and
uses @ instead of ? to separate the query portion of the
file name from the rest. Therefore, a URL that would be
saved as www.xemacs.org:4300/search.pl?input=blah in
Unix mode would be saved as
GNU Wget 1.10.2 Last change: 2009-04-08 11
GNU Wget WGET(1)
www.xemacs.org]4300/search.pl@input=blah in Windows
mode. This mode is the default on Windows.
If you append ,nocontrol to the mode, as in
unix,nocontrol, escaping of the control characters is
also switched off. You can use
--restrict-file-names=nocontrol to turn off escaping of
control characters without affecting the choice of the
OS to use as file name restriction mode.
-4
--inet4-only
-6
--inet6-only
Force connecting to IPv4 or IPv6 addresses. With
--inet4-only or -4, Wget will only connect to IPv4
hosts, ignoring A records in DNS, and refusing to
connect to IPv6 addresses specified in URLs.
Conversely, with --inet6-only or -6, Wget will only
connect to IPv6 hosts and ignore A records and IPv4
addresses.
Neither options should be needed normally. By default,
an IPv6-aware Wget will use the address family specified
by the host's DNS record. If the DNS responds with both
IPv4 and IPv6 addresses, Wget will them in sequence
until it finds one it can connect to. (Also see
"--prefer-family" option described below.)
These options can be used to deliberately force the use
of IPv4 or IPv6 address families on dual family systems,
usually to aid debugging or to deal with broken network
configuration. Only one of --inet6-only and
--inet4-only may be specified at the same time. Neither
option is available in Wget compiled without IPv6
support.
--prefer-family=IPv4/IPv6/none
When given a choice of several addresses, connect to the
addresses with specified address family first. IPv4
addresses are preferred by default.
This avoids spurious errors and connect attempts when
accessing hosts that resolve to both IPv6 and IPv4
addresses from IPv4 networks. For example, www.kame.net
resolves to 2001:200:0:8002:203:47ff:fea5:3085 and to
203.178.141.194. When the preferred family is "IPv4",
the IPv4 address is used first; when the preferred
family is "IPv6", the IPv6 address is used first; if the
specified value is "none", the address order returned by
DNS is used without change.
GNU Wget 1.10.2 Last change: 2009-04-08 12
GNU Wget WGET(1)
Unlike -4 and -6, this option doesn't inhibit access to
any address family, it only changes the order in which
the addresses are accessed. Also note that the
reordering performed by this option is stable---it
doesn't affect order of addresses of the same family.
That is, the relative order of all IPv4 addresses and of
all IPv6 addresses remains intact in all cases.
--retry-connrefused
Consider ``connection refused'' a transient error and
try again. Normally Wget gives up on a URL when it is
unable to connect to the site because failure to connect
is taken as a sign that the server is not running at all
and that retries would not help. This option is for
mirroring unreliable sites whose servers tend to
disappear for short periods of time.
--user=user
--password=password
Specify the username user and password password for both
FTP and HTP file retrieval. These parameters can be
overridden using the --ftp-user and --ftp-password
options for FTP connections and the --http-user and
--http-password options for HTP connections.
Directory Options
-nd
--no-directories
Do not create a hierarchy of directories when retrieving
recursively. With this option turned on, all files will
get saved to the current directory, without clobbering
(if a name shows up more than once, the filenames will
get extensions .n).
-x
--force-directories
The opposite of -nd---create a hierarchy of directories,
even if one would not have been created otherwise. E.g.
wget -x http:/fly.srk.fer.hr/robots.txt will save the
downloaded file to fly.srk.fer.hr/robots.txt.
-nH
--no-host-directories
Disable generation of host-prefixed directories. By
default, invoking Wget with -r http:/fly.srk.fer.hr/
will create a structure of directories beginning with
fly.srk.fer.hr/. This option disables such behavior.
--protocol-directories
Use the protocol name as a directory component of local
file names. For example, with this option, wget -r
GNU Wget 1.10.2 Last change: 2009-04-08 13
GNU Wget WGET(1)
http:/host will save to http/host/... rather than just
to host/....
--cut-dirs=number
Ignore number directory components. This is useful for
getting a fine-grained control over the directory where
recursive retrieval will be saved.
Take, for example, the directory at
ftp:/ftp.xemacs.org/pub/xemacs/. If you retrieve it
with -r, it will be saved locally under
ftp.xemacs.org/pub/xemacs/. While the -nH option can
remove the ftp.xemacs.org/ part, you are still stuck
with pub/xemacs. This is where --cut-dirs comes in
handy; it makes Wget not ``see'' number remote directory
components. Here are several examples of how --cut-dirs
option works.
No options -> ftp.xemacs.org/pub/xemacs/
-nH -> pub/xemacs/
-nH --cut-dirs=1 -> xemacs/
-nH --cut-dirs=2 -> .
--cut-dirs=1 -> ftp.xemacs.org/xemacs/
...
If you just want to get rid of the directory structure,
this option is similar to a combination of -nd and -P.
However, unlike -nd, --cut-dirs does not lose with
subdirectories---for instance, with -nH --cut-dirs=1, a
beta/ subdirectory will be placed to xemacs/beta, as one
would expect.
-P prefix
--directory-prefix=prefix
Set directory prefix to prefix. The directory prefix is
the directory where all other files and subdirectories
will be saved to, i.e. the top of the retrieval tree.
The default is . (the current directory).
HTP Options
-E
--html-extension
If a file of type application/xhtml]xml or text/html is
downloaded and the URL does not end with the regexp
\.[Hh][Tt][Mm][Ll]?, this option will cause the suffix
.html to be appended to the local filename. This is
useful, for instance, when you're mirroring a remote
site that uses .asp pages, but you want the mirrored
pages to be viewable on your stock Apache server.
Another good use for this is when you're downloading
GNU Wget 1.10.2 Last change: 2009-04-08 14
GNU Wget WGET(1)
CGI-generated materials. A URL like
http:/site.com/article.cgi?25 will be saved as
article.cgi?25.html.
Note that filenames changed in this way will be re-
downloaded every time you re-mirror a site, because Wget
can't tell that the local X.html file corresponds to
remote URL X (since it doesn't yet know that the URL
produces output of type text/html or
application/xhtml]xml. To prevent this re-downloading,
you must use -k and -K so that the original version of
the file will be saved as X.orig.
--http-user=user
--http-password=password
Specify the username user and password password on an
HTP server. According to the type of the challenge,
Wget will encode them using either the "basic"
(insecure) or the "digest" authentication scheme.
Another way to specify username and password is in the
URL itself. Either method reveals your password to
anyone who bothers to run "ps". To prevent the
passwords from being seen, store them in .wgetrc or
.netrc, and make sure to protect those files from other
users with "chmod". If the passwords are really
important, do not leave them lying in those files
either---edit the files and delete them after Wget has
started the download.
--no-cache
Disable server-side cache. In this case, Wget will send
the remote server an appropriate directive (Pragma: no-
cache) to get the file from the remote service, rather
than returning the cached version. This is especially
useful for retrieving and flushing out-of-date documents
on proxy servers.
Caching is allowed by default.
--no-cookies
Disable the use of cookies. Cookies are a mechanism for
maintaining server-side state. The server sends the
client a cookie using the "Set-Cookie" header, and the
client responds with the same cookie upon further
requests. Since cookies allow the server owners to keep
track of visitors and for sites to exchange this
information, some consider them a breach of privacy.
The default is to use cookies; however, storing cookies
is not on by default.
--load-cookies file
GNU Wget 1.10.2 Last change: 2009-04-08 15
GNU Wget WGET(1)
Load cookies from file before the first HTP retrieval.
file is a textual file in the format originally used by
Netscape's cookies.txt file.
You will typically use this option when mirroring sites
that require that you be logged in to access some or all
of their content. The login process typically works by
the web server issuing an HTP cookie upon receiving and
verifying your credentials. The cookie is then resent
by the browser when accessing that part of the site, and
so proves your identity.
Mirroring such a site requires Wget to send the same
cookies your browser sends when communicating with the
site. This is achieved by --load-cookies---simply point
Wget to the location of the cookies.txt file, and it
will send the same cookies your browser would send in
the same situation. Different browsers keep textual
cookie files in different locations:
Netscape 4.x.
The cookies are in ~/.netscape/cookies.txt.
Mozilla and Netscape 6.x.
Mozilla's cookie file is also named cookies.txt,
located somewhere under ~/.mozilla, in the directory
of your profile. The full path usually ends up
looking somewhat like ~/.mozilla/default/some-
weird-string/cookies.txt.
Internet Explorer.
You can produce a cookie file Wget can use by using
the File menu, Import and Export, Export Cookies.
This has been tested with Internet Explorer 5; it is
not guaranteed to work with earlier versions.
Other browsers.
If you are using a different browser to create your
cookies, --load-cookies will only work if you can
locate or produce a cookie file in the Netscape
format that Wget expects.
If you cannot use --load-cookies, there might still be
an alternative. If your browser supports a ``cookie
manager'', you can use it to view the cookies used when
accessing the site you're mirroring. Write down the
name and value of the cookie, and manually instruct Wget
to send those cookies, bypassing the ``official'' cookie
support:
wget --no-cookies --header "Cookie: ="
GNU Wget 1.10.2 Last change: 2009-04-08 16
GNU Wget WGET(1)
--save-cookies file
Save cookies to file before exiting. This will not save
cookies that have expired or that have no expiry time
(so-called ``session cookies''), but also see
--keep-session-cookies.
--keep-session-cookies
When specified, causes --save-cookies to also save
session cookies. Session cookies are normally not saved
because they are meant to be kept in memory and
forgotten when you exit the browser. Saving them is
useful on sites that require you to log in or to visit
the home page before you can access some pages. With
this option, multiple Wget runs are considered a single
browser session as far as the site is concerned.
Since the cookie file format does not normally carry
session cookies, Wget marks them with an expiry
timestamp of 0. Wget's --load-cookies recognizes those
as session cookies, but it might confuse other browsers.
Also note that cookies so loaded will be treated as
other session cookies, which means that if you want
--save-cookies to preserve them again, you must use
--keep-session-cookies again.
--ignore-length
Unfortunately, some HTP servers (CGI programs, to be
more precise) send out bogus "Content-Length" headers,
which makes Wget go wild, as it thinks not all the
document was retrieved. You can spot this syndrome if
Wget retries getting the same document again and again,
each time claiming that the (otherwise normal)
connection has closed on the very same byte.
With this option, Wget will ignore the "Content-Length"
header---as if it never existed.
--header=header-line
Send header-line along with the rest of the headers in
each HTP request. The supplied header is sent as-is,
which means it must contain name and value separated by
colon, and must not contain newlines.
You may define more than one additional header by
specifying --header more than once.
wget --header='Accept-Charset: iso-8859-2' \
--header='Accept-Language: hr' \
http:/fly.srk.fer.hr/
Specification of an empty string as the header value
will clear all previous user-defined headers.
GNU Wget 1.10.2 Last change: 2009-04-08 17
GNU Wget WGET(1)
As of Wget 1.10, this option can be used to override
headers otherwise generated automatically. This example
instructs Wget to connect to localhost, but to specify
foo.bar in the "Host" header:
wget --header="Host: foo.bar" http:/localhost/
In versions of Wget prior to 1.10 such use of --header
caused sending of duplicate headers.
--proxy-user=user
--proxy-password=password
Specify the username user and password password for
authentication on a proxy server. Wget will encode them
using the "basic" authentication scheme.
Security considerations similar to those with
--http-password pertain here as well.
--referer=url
Include `Referer: url' header in HTP request. Useful
for retrieving documents with server-side processing
that assume they are always being retrieved by
interactive web browsers and only come out properly when
Referer is set to one of the pages that point to them.
--save-headers
Save the headers sent by the HTP server to the file,
preceding the actual contents, with an empty line as the
separator.
-U agent-string
--user-agent=agent-string
Identify as agent-string to the HTP server.
The HTP protocol allows the clients to identify
themselves using a "User-Agent" header field. This
enables distinguishing the W software, usually for
statistical purposes or for tracing of protocol
violations. Wget normally identifies as Wget/version,
version being the current version number of Wget.
However, some sites have been known to impose the policy
of tailoring the output according to the
"User-Agent"-supplied information. While this is not
such a bad idea in theory, it has been abused by servers
denying information to clients other than (historically)
Netscape or, more frequently, Microsoft Internet
Explorer. This option allows you to change the
"User-Agent" line issued by Wget. Use of this option is
discouraged, unless you really know what you are doing.
GNU Wget 1.10.2 Last change: 2009-04-08 18
GNU Wget WGET(1)
Specifying empty user agent with --user-agent=""
instructs Wget not to send the "User-Agent" header in
HTP requests.
--post-data=string
--post-file=file
Use POST as the method for all HTP requests and send
the specified data in the request body. "--post-data"
sends string as data, whereas "--post-file" sends the
contents of file. Other than that, they work in exactly
the same way.
Please be aware that Wget needs to know the size of the
POST data in advance. Therefore the argument to
"--post-file" must be a regular file; specifying a FIFO
or something like /dev/stdin won't work. It's not quite
clear how to work around this limitation inherent in
HTP/1.0. Although HTP/1.1 introduces chunked transfer
that doesn't require knowing the request length in
advance, a client can't use chunked unless it knows it's
talking to an HTP/1.1 server. And it can't know that
until it receives a response, which in turn requires the
request to have been completed -- a chicken-and-egg
problem.
Note: if Wget is redirected after the POST request is
completed, it will not send the POST data to the
redirected URL. This is because URLs that process POST
often respond with a redirection to a regular page,
which does not desire or accept POST. It is not
completely clear that this behavior is optimal; if it
doesn't work out, it might be changed in the future.
This example shows how to log to a server using POST and
then proceed to download the desired pages, presumably
only accessible to authorized users:
# Log in to the server. This can be done only once.
wget --save-cookies cookies.txt \
--post-data 'user=foo&password=bar' \
http:/server.com/auth.php
# Now grab the page or pages we care about.
wget --load-cookies cookies.txt \
-p http:/server.com/interesting/article.php
If the server is using session cookies to track user
authentication, the above will not work because
--save-cookies will not save them (and neither will
browsers) and the cookies.txt file will be empty. In
that case use --keep-session-cookies along with
--save-cookies to force saving of session cookies.
GNU Wget 1.10.2 Last change: 2009-04-08 19
GNU Wget WGET(1)
HTPS (SL/TLS) Options
To support encrypted HTP (HTPS) downloads, Wget must be
compiled with an external SL library, currently OpenSL.
If Wget is compiled without SL support, none of these
options are available.
--secure-protocol=protocol
Choose the secure protocol to be used. Legal values are
auto, SLv2, SLv3, and TLSv1. If auto is used, the SL
library is given the liberty of choosing the appropriate
protocol automatically, which is achieved by sending an
SLv2 greeting and announcing support for SLv3 and
TLSv1. This is the default.
Specifying SLv2, SLv3, or TLSv1 forces the use of the
corresponding protocol. This is useful when talking to
old and buggy SL server implementations that make it
hard for OpenSL to choose the correct protocol version.
Fortunately, such servers are quite rare.
--no-check-certificate
Don't check the server certificate against the available
certificate authorities. Also don't require the URL
host name to match the common name presented by the
certificate.
As of Wget 1.10, the default is to verify the server's
certificate against the recognized certificate
authorities, breaking the SL handshake and aborting the
download if the verification fails. Although this
provides more secure downloads, it does break
interoperability with some sites that worked with
previous Wget versions, particularly those using
self-signed, expired, or otherwise invalid certificates.
This option forces an ``insecure'' mode of operation
that turns the certificate verification errors into
warnings and allows you to proceed.
If you encounter ``certificate verification'' errors or
ones saying that ``common name doesn't match requested
host name'', you can use this option to bypass the
verification and proceed with the download. Only use
this option if you are otherwise convinced of the site's
authenticity, or if you really don't care about the
validity of its certificate. It is almost always a bad
idea not to check the certificates when transmitting
confidential or important data.
--certificate=file
Use the client certificate stored in file. This is
needed for servers that are configured to require
GNU Wget 1.10.2 Last change: 2009-04-08 20
GNU Wget WGET(1)
certificates from the clients that connect to them.
Normally a certificate is not required and this switch
is optional.
--certificate-type=type
Specify the type of the client certificate. Legal
values are PEM (assumed by default) and DER, also known
as ASN1.
--private-key=file
Read the private key from file. This allows you to
provide the private key in a file separate from the
certificate.
--private-key-type=type
Specify the type of the private key. Accepted values
are PEM (the default) and DER.
--ca-certificate=file
Use file as the file with the bundle of certificate
authorities (``CA'') to verify the peers. The
certificates must be in PEM format.
Without this option Wget looks for CA certificates at
the system-specified locations, chosen at OpenSL
installation time.
--ca-directory=directory
Specifies directory containing CA certificates in PEM
format. Each file contains one CA certificate, and the
file name is based on a hash value derived from the
certificate. This is achieved by processing a
certificate directory with the "crehash" utility
supplied with OpenSL. Using --ca-directory is more
efficient than --ca-certificate when many certificates
are installed because it allows Wget to fetch
certificates on demand.
Without this option Wget looks for CA certificates at
the system-specified locations, chosen at OpenSL
installation time.
--random-file=file
Use file as the source of random data for seeding the
pseudo-random number generator on systems without
/dev/random.
On such systems the SL library needs an external source
of randomness to initialize. Randomness may be provided
by EGD (see --egd-file below) or read from an external
source specified by the user. If this option is not
specified, Wget looks for random data in $RANDFILE or,
GNU Wget 1.10.2 Last change: 2009-04-08 21
GNU Wget WGET(1)
if that is unset, in $HOME/.rnd. If none of those are
available, it is likely that SL encryption will not be
usable.
If you're getting the ``Could not seed OpenSL PRNG;
disabling SL.'' error, you should provide random data
using some of the methods described above.
--egd-file=file
Use file as the EGD socket. EGD stands for Entropy
Gathering Daemon, a user-space program that collects
data from various unpredictable system sources and makes
it available to other programs that might need it.
Encryption software, such as the SL library, needs
sources of non-repeating randomness to seed the random
number generator used to produce cryptographically
strong keys.
OpenSL allows the user to specify his own source of
entropy using the "RANDFILE" environment variable. If
this variable is unset, or if the specified file does
not produce enough randomness, OpenSL will read random
data from EGD socket specified using this option.
If this option is not specified (and the equivalent
startup command is not used), EGD is never contacted.
EGD is not needed on modern Unix systems that support
/dev/random.
FTP Options
--ftp-user=user
--ftp-password=password
Specify the username user and password password on an
FTP server. Without this, or the corresponding startup
option, the password defaults to -wget@, normally used
for anonymous FTP.
Another way to specify username and password is in the
URL itself. Either method reveals your password to
anyone who bothers to run "ps". To prevent the
passwords from being seen, store them in .wgetrc or
.netrc, and make sure to protect those files from other
users with "chmod". If the passwords are really
important, do not leave them lying in those files
either---edit the files and delete them after Wget has
started the download.
--no-remove-listing
Don't remove the temporary .listing files generated by
FTP retrievals. Normally, these files contain the raw
directory listings received from FTP servers. Not
GNU Wget 1.10.2 Last change: 2009-04-08 22
GNU Wget WGET(1)
removing them can be useful for debugging purposes, or
when you want to be able to easily check on the contents
of remote server directories (e.g. to verify that a
mirror you're running is complete).
Note that even though Wget writes to a known filename
for this file, this is not a security hole in the
scenario of a user making .listing a symbolic link to
/etc/passwd or something and asking "root" to run Wget
in his or her directory. Depending on the options used,
either Wget will refuse to write to .listing, making the
globbing/recursion/time-stamping operation fail, or the
symbolic link will be deleted and replaced with the
actual .listing file, or the listing will be written to
a .listing.number file.
Even though this situation isn't a problem, though,
"root" should never run Wget in a non-trusted user's
directory. A user could do something as simple as
linking index.html to /etc/passwd and asking "root" to
run Wget with -N or -r so the file will be overwritten.
--no-glob
Turn off FTP globbing. Globbing refers to the use of
shell-like special characters (wildcards), like *, ?, [
and ] to retrieve more than one file from the same
directory at once, like:
wget ftp:/gnjilux.srk.fer.hr/*.msg
By default, globbing will be turned on if the URL
contains a globbing character. This option may be used
to turn globbing on or off permanently.
You may have to quote the URL to protect it from being
expanded by your shell. Globbing makes Wget look for a
directory listing, which is system-specific. This is
why it currently works only with Unix FTP servers (and
the ones emulating Unix "ls" output).
--no-passive-ftp
Disable the use of the passive FTP transfer mode.
Passive FTP mandates that the client connect to the
server to establish the data connection rather than the
other way around.
If the machine is connected to the Internet directly,
both passive and active FTP should work equally well.
Behind most firewall and NAT configurations passive FTP
has a better chance of working. However, in some rare
firewall configurations, active FTP actually works when
passive FTP doesn't. If you suspect this to be the
GNU Wget 1.10.2 Last change: 2009-04-08 23
GNU Wget WGET(1)
case, use this option, or set "passiveftp=off" in your
init file.
--retr-symlinks
Usually, when retrieving FTP directories recursively and
a symbolic link is encountered, the linked-to file is
not downloaded. Instead, a matching symbolic link is
created on the local filesystem. The pointed-to file
will not be downloaded unless this recursive retrieval
would have encountered it separately and downloaded it
anyway.
When --retr-symlinks is specified, however, symbolic
links are traversed and the pointed-to files are
retrieved. At this time, this option does not cause
Wget to traverse symlinks to directories and recurse
through them, but in the future it should be enhanced to
do this.
Note that when retrieving a file (not a directory)
because it was specified on the command-line, rather
than because it was recursed to, this option has no
effect. Symbolic links are always traversed in this
case.
--no-http-keep-alive
Turn off the ``keep-alive'' feature for HTP downloads.
Normally, Wget asks the server to keep the connection
open so that, when you download more than one document
from the same server, they get transferred over the same
TCP connection. This saves time and at the same time
reduces the load on the server.
This option is useful when, for some reason, persistent
(keep-alive) connections don't work for you, for example
due to a server bug or due to the inability of server-
side scripts to cope with the connections.
Recursive Retrieval Options
-r
--recursive
Turn on recursive retrieving.
-l depth
--level=depth
Specify recursion maximum depth level depth. The
default maximum depth is 5.
--delete-after
This option tells Wget to delete every single file it
downloads, after having done so. It is useful for pre-
GNU Wget 1.10.2 Last change: 2009-04-08 24
GNU Wget WGET(1)
fetching popular pages through a proxy, e.g.:
wget -r -nd --delete-after http:/whatever.com/~popular/page/
The -r option is to retrieve recursively, and -nd to not
create directories.
Note that --delete-after deletes files on the local
machine. It does not issue the DELE command to remote
FTP sites, for instance. Also note that when
--delete-after is specified, --convert-links is ignored,
so .orig files are simply not created in the first
place.
-k
--convert-links
After the download is complete, convert the links in the
document to make them suitable for local viewing. This
affects not only the visible hyperlinks, but any part of
the document that links to external content, such as
embedded images, links to style sheets, hyperlinks to
non-HTML content, etc.
Each link will be changed in one of the two ways:
* The links to files that have been downloaded by Wget
will be changed to refer to the file they point to
as a relative link.
Example: if the downloaded file /foo/doc.html links
to /bar/img.gif, also downloaded, then the link in
doc.html will be modified to point to
../bar/img.gif. This kind of transformation works
reliably for arbitrary combinations of directories.
* The links to files that have not been downloaded by
Wget will be changed to include host name and
absolute path of the location they point to.
Example: if the downloaded file /foo/doc.html links
to /bar/img.gif (or to ../bar/img.gif), then the
link in doc.html will be modified to point to
http:/hostname/bar/img.gif.
Because of this, local browsing works reliably: if a
linked file was downloaded, the link will refer to its
local name; if it was not downloaded, the link will
refer to its full Internet address rather than
presenting a broken link. The fact that the former
links are converted to relative links ensures that you
can move the downloaded hierarchy to another directory.
GNU Wget 1.10.2 Last change: 2009-04-08 25
GNU Wget WGET(1)
Note that only at the end of the download can Wget know
which links have been downloaded. Because of that, the
work done by -k will be performed at the end of all the
downloads.
-K
--backup-converted
When converting a file, back up the original version
with a .orig suffix. Affects the behavior of -N.
-m
--mirror
Turn on options suitable for mirroring. This option
turns on recursion and time-stamping, sets infinite
recursion depth and keeps FTP directory listings. It is
currently equivalent to -r -N -l inf
--no-remove-listing.
-p
--page-requisites
This option causes Wget to download all the files that
are necessary to properly display a given HTML page.
This includes such things as inlined images, sounds, and
referenced stylesheets.
Ordinarily, when downloading a single HTML page, any
requisite documents that may be needed to display it
properly are not downloaded. Using -r together with -l
can help, but since Wget does not ordinarily distinguish
between external and inlined documents, one is generally
left with ``leaf documents'' that are missing their
requisites.
For instance, say document 1.html contains an ""
tag referencing 1.gif and an "" tag pointing to
external document 2.html. Say that 2.html is similar
but that its image is 2.gif and it links to 3.html. Say
this continues up to some arbitrarily high number.
If one executes the command:
wget -r -l 2 http://1.html
then 1.html, 1.gif, 2.html, 2.gif, and 3.html will be
downloaded. As you can see, 3.html is without its
requisite 3.gif because Wget is simply counting the
number of hops (up to 2) away from 1.html in order to
determine where to stop the recursion. However, with
this command:
wget -r -l 2 -p http://1.html
GNU Wget 1.10.2 Last change: 2009-04-08 26
GNU Wget WGET(1)
all the above files and 3.html's requisite 3.gif will be
downloaded. Similarly,
wget -r -l 1 -p http://1.html
will cause 1.html, 1.gif, 2.html, and 2.gif to be
downloaded. One might think that:
wget -r -l 0 -p http://1.html
would download just 1.html and 1.gif, but unfortunately
this is not the case, because -l 0 is equivalent to -l
inf---that is, infinite recursion. To download a single
HTML page (or a handful of them, all specified on the
command-line or in a -i URL input file) and its (or
their) requisites, simply leave off -r and -l:
wget -p http://1.html
Note that Wget will behave as if -r had been specified,
but only that single page and its requisites will be
downloaded. Links from that page to external documents
will not be followed. Actually, to download a single
page and all its requisites (even if they exist on
separate websites), and make sure the lot displays
properly locally, this author likes to use a few options
in addition to -p:
wget -E -H -k -K -p http://
To finish off this topic, it's worth knowing that Wget's
idea of an external document link is any URL specified
in an "" tag, an "" tag, or a "" tag
other than "".
--strict-comments
Turn on strict parsing of HTML comments. The default is
to terminate comments at the first occurrence of -->.
According to specifications, HTML comments are expressed
as SGML declarations. Declaration is special markup
that begins with , such as , that may contain comments between a pair of --
delimiters. HTML comments are ``empty declarations'',
SGML declarations without any non-comment text.
Therefore, is a valid comment, and so is
, but is not.
On the other hand, most HTML writers don't perceive
comments as anything other than text delimited with , which is not quite the same. For example,
something like works as a valid comment
GNU Wget 1.10.2 Last change: 2009-04-08 27
GNU Wget WGET(1)
as long as the number of dashes is a multiple of four
(!). If not, the comment technically lasts until the
next --, which may be at the other end of the document.
Because of this, many popular browsers completely ignore
the specification and implement what users have come to
expect: comments delimited with .
Until version 1.9, Wget interpreted comments strictly,
which resulted in missing links in many web pages that
displayed fine in browsers, but had the misfortune of
containing non-compliant comments. Beginning with
version 1.9, Wget has joined the ranks of clients that
implements ``naive'' comments, terminating each comment
at the first occurrence of -->.
If, for whatever reason, you want strict comment
parsing, use this option to turn it on.
Recursive Accept/Reject Options
-A acclist --accept acclist
-R rejlist --reject rejlist
Specify comma-separated lists of file name suffixes or
patterns to accept or reject (@pxref{Types of Files} for
more details).
-D domain-list
--domains=domain-list
Set domains to be followed. domain-list is a comma-
separated list of domains. Note that it does not turn
on -H.
--exclude-domains domain-list
Specify the domains that are not to be followed..
--follow-ftp
Follow FTP links from HTML documents. Without this
option, Wget will ignore all the FTP links.
--follow-tags=list
Wget has an internal table of HTML tag / attribute pairs
that it considers when looking for linked documents
during a recursive retrieval. If a user wants only a
subset of those tags to be considered, however, he or
she should be specify such tags in a comma-separated
list with this option.
--ignore-tags=list
This is the opposite of the --follow-tags option. To
skip certain HTML tags when recursively looking for
documents to download, specify them in a comma-separated
list.
GNU Wget 1.10.2 Last change: 2009-04-08 28
GNU Wget WGET(1)
In the past, this option was the best bet for
downloading a single page and its requisites, using a
command-line like:
wget --ignore-tags=a,area -H -k -K -r http://
However, the author of this option came across a page
with tags like "" and came to
the realization that specifying tags to ignore was not
enough. One can't just tell Wget to ignore "",
because then stylesheets will not be downloaded. Now
the best bet for downloading a single page and its
requisites is the dedicated --page-requisites option.
-H
--span-hosts
Enable spanning across hosts when doing recursive
retrieving.
-L
--relative
Follow relative links only. Useful for retrieving a
specific home page without any distractions, not even
those from the same hosts.
-I list
--include-directories=list
Specify a comma-separated list of directories you wish
to follow when downloading (@pxref{Directory-Based
Limits} for more details.) Elements of list may contain
wildcards.
-X list
--exclude-directories=list
Specify a comma-separated list of directories you wish
to exclude from download (@pxref{Directory-Based Limits}
for more details.) Elements of list may contain
wildcards.
-np
--no-parent
Do not ever ascend to the parent directory when
retrieving recursively. This is a useful option, since
it guarantees that only the files below a certain
hierarchy will be downloaded.
EXAMPLES
The examples are divided into three sections loosely based
on their complexity.
GNU Wget 1.10.2 Last change: 2009-04-08 29
GNU Wget WGET(1)
Simple Usage
]o Say you want to download a URL. Just type:
wget http:/fly.srk.fer.hr/
]o But what will happen if the connection is slow, and the
file is lengthy? The connection will probably fail
before the whole file is retrieved, more than once. In
this case, Wget will try getting the file until it
either gets the whole of it, or exceeds the default
number of retries (this being 20). It is easy to change
the number of tries to 45, to insure that the whole file
will arrive safely:
wget --tries=45 http:/fly.srk.fer.hr/jpg/flyweb.jpg
]o Now let's leave Wget to work in the background, and
write its progress to log file log. It is tiring to
type --tries, so we shall use -t.
wget -t 45 -o log http:/fly.srk.fer.hr/jpg/flyweb.jpg &
The ampersand at the end of the line makes sure that
Wget works in the background. To unlimit the number of
retries, use -t inf.
]o The usage of FTP is as simple. Wget will take care of
login and password.
wget ftp:/gnjilux.srk.fer.hr/welcome.msg
]o If you specify a directory, Wget will retrieve the
directory listing, parse it and convert it to HTML.
Try:
wget ftp:/ftp.gnu.org/pub/gnu/
links index.html
Advanced Usage
]o You have a file that contains the URLs you want to
download? Use the -i switch:
wget -i
If you specify - as file name, the URLs will be read
from standard input.
]o Create a five levels deep mirror image of the GNU web
site, with the same directory structure the original
has, with only one try per document, saving the log of
GNU Wget 1.10.2 Last change: 2009-04-08 30
GNU Wget WGET(1)
the activities to gnulog:
wget -r http:/www.gnu.org/ -o gnulog
]o The same as the above, but convert the links in the HTML
files to point to local files, so you can view the
documents off-line:
wget --convert-links -r http:/www.gnu.org/ -o gnulog
]o Retrieve only one HTML page, but make sure that all the
elements needed for the page to be displayed, such as
inline images and external style sheets, are also
downloaded. Also make sure the downloaded page
references the downloaded links.
wget -p --convert-links http:/www.server.com/dir/page.html
The HTML page will be saved to
www.server.com/dir/page.html, and the images,
stylesheets, etc., somewhere under www.server.com/,
depending on where they were on the remote server.
]o The same as the above, but without the www.server.com/
directory. In fact, I don't want to have all those
random server directories anyway---just save all those
files under a download/ subdirectory of the current
directory.
wget -p --convert-links -nH -nd -Pdownload \
http:/www.server.com/dir/page.html
]o Retrieve the index.html of www.lycos.com, showing the
original server headers:
wget -S http:/www.lycos.com/
]o Save the server headers with the file, perhaps for
post-processing.
wget --save-headers http:/www.lycos.com/
more index.html
]o Retrieve the first two levels of wuarchive.wustl.edu,
saving them to /tmp.
wget -r -l2 -P/tmp ftp:/wuarchive.wustl.edu/
]o You want to download all the GIFs from a directory on an
HTP server. You tried wget
http:/www.server.com/dir/*.gif, but that didn't work
because HTP retrieval does not support globbing. In
GNU Wget 1.10.2 Last change: 2009-04-08 31
GNU Wget WGET(1)
that case, use:
wget -r -l1 --no-parent -A.gif http:/www.server.com/dir/
More verbose, but the effect is the same. -r -l1 means
to retrieve recursively, with maximum depth of 1.
--no-parent means that references to the parent
directory are ignored, and -A.gif means to download only
the GIF files. -A "*.gif" would have worked too.
]o Suppose you were in the middle of downloading, when Wget
was interrupted. Now you do not want to clobber the
files already present. It would be:
wget -nc -r http:/www.gnu.org/
]o If you want to encode your own username and password to
HTP or FTP, use the appropriate URL syntax.
wget ftp:/hniksic:mypassword@unix.server.com/.emacs
Note, however, that this usage is not advisable on
multi-user systems because it reveals your password to
anyone who looks at the output of "ps".
]o You would like the output documents to go to standard
output instead of to files?
wget -O - http:/jagor.srce.hr/ http:/www.srce.hr/
You can also combine the two options and make pipelines
to retrieve the documents from remote hotlists:
wget -O - http:/cool.list.com/ wget --force-html -i -
Very Advanced Usage
]o If you wish Wget to keep a mirror of a page (or FTP
subdirectories), use --mirror (-m), which is the
shorthand for -r -l inf -N. You can put Wget in the
crontab file asking it to recheck a site each Sunday:
crontab
0 0 * * 0 wget --mirror http:/www.gnu.org/ -o /home/me/weeklog
]o In addition to the above, you want the links to be
converted for local viewing. But, after having read
this manual, you know that link conversion doesn't play
well with timestamping, so you also want Wget to back up
the original HTML files before the conversion. Wget
invocation would look like this:
GNU Wget 1.10.2 Last change: 2009-04-08 32
GNU Wget WGET(1)
wget --mirror --convert-links --backup-converted \
http:/www.gnu.org/ -o /home/me/weeklog
]o But you've also noticed that local viewing doesn't work
all that well when HTML files are saved under extensions
other than .html, perhaps because they were served as
index.cgi. So you'd like Wget to rename all the files
served with content-type text/html or
application/xhtml]xml to name.html.
wget --mirror --convert-links --backup-converted \
--html-extension -o /home/me/weeklog \
http:/www.gnu.org/
Or, with less typing:
wget -m -k -K -E http:/www.gnu.org/ -o /home/me/weeklog
FILES
/etc/wgetrc
Default location of the global startup file.
.wgetrc
User startup file.
BUGS
You are welcome to send bug reports about GNU Wget to
.
Before actually submitting a bug report, please try to
follow a few simple guidelines.
1. Please try to ascertain that the behavior you see really
is a bug. If Wget crashes, it's a bug. If Wget does
not behave as documented, it's a bug. If things work
strange, but you are not sure about the way they are
supposed to work, it might well be a bug.
2. Try to repeat the bug in as simple circumstances as
possible. E.g. if Wget crashes while downloading wget
-rl0 -kKE -t5 -Y0 http:/yoyodyne.com -o /tmp/log, you
should try to see if the crash is repeatable, and if
will occur with a simpler set of options. You might
even try to start the download at the page where the
crash occurred to see if that page somehow triggered the
crash.
Also, while I will probably be interested to know the
contents of your .wgetrc file, just dumping it into the
debug message is probably a bad idea. Instead, you
should first try to see if the bug repeats with .wgetrc
moved out of the way. Only if it turns out that .wgetrc
GNU Wget 1.10.2 Last change: 2009-04-08 33
GNU Wget WGET(1)
settings affect the bug, mail me the relevant parts of
the file.
3. Please start Wget with -d option and send us the
resulting output (or relevant parts thereof). If Wget
was compiled without debug support, recompile it---it is
much easier to trace bugs with debug support on.
Note: please make sure to remove any potentially
sensitive information from the debug log before sending
it to the bug address. The "-d" won't go out of its way
to collect sensitive information, but the log will
contain a fairly complete transcript of Wget's
communication with the server, which may include
passwords and pieces of downloaded data. Since the bug
address is publically archived, you may assume that all
bug reports are visible to the public.
4. If Wget has crashed, try to run it in a debugger, e.g.
"gdb `which wget` core" and type "where" to get the
backtrace. This may not work if the system
administrator has disabled core files, but it is safe to
try.
SEE ALSO
GNU Info entry for wget.
AUTHOR
Originally written by Hrvoje Niksic .
COPYRIGHT
Copyright (c) 1996--2005 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies
of this manual provided the copyright notice and this
permission notice are preserved on all copies.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation
License, Version 1.2 or any later version published by the
Free Software Foundation; with the Invariant Sections being
``GNU General Public License'' and ``GNU Free Documentation
License'', with no Front-Cover Texts, and with no Back-Cover
Texts. A copy of the license is included in the section
entitled ``GNU Free Documentation License''.
ATRIBUTES
See attributes(5) for descriptions of the following
attributes:
GNU Wget 1.10.2 Last change: 2009-04-08 34
GNU Wget WGET(1)
ATRIBUTE TYPE ATRIBUTE VALUE
Availability SUNWwgetr, SUNWwgetu
Interface Stability External
NOTES
Source for wget is available on http:/opensolaris.org.
GNU Wget 1.10.2 Last change: 2009-04-08 35
