NAME
Regexp::Common - Provide commonly requested regular expressions
SYNOPSIS
# STANDARD USAGE
use Regexp::Common;
while (<>) {/$RE{num}{real}/ and print q{a number};
/$RE{quoted} and print q{a ['"`] quoted string};
/$RE{delimited}{-delim=>'/'}/ and print q{a /.../ sequence};
/$RE{balanced}{-parens=>'()'}/ and print q{balanced parentheses};
/$RE{profanity}/ and print q{a #*@%-ing word};
}# SUBROUTINE-BASED INTERFACE
use Regexp::Common 'REALL';
while (<>) {$ =~ REnumreal() and print q{a number};
$ =~ REquoted() and print q{a ['"`] quoted string};
$ =~ REdelimited(-delim=>'/') and print q{a /.../ sequence};
$ =~ REbalanced(-parens=>'()'} and print q{balanced parentheses};
$ =~ REprofanity() and print q{a #*@%-ing word};
}# IN-LINE MATCHING...
if ( $RE{num}{int}->matches($text) ) {...}
# ...AND SUBSTITUTION
my $cropped = $RE{ws}{crop}->subs($uncropped);
# ROLL-YOUR-OWN PATTERNS
use Regexp::Common 'pattern';
pattern name => ['name', 'mine'],create => '(?i:J[.]?\s+A[.]?\s+Perl-Hacker)',
;my $namematcher = $RE{name}{mine};
pattern name => [ 'lineof', '-char=' ],
create => sub {my $flags = shift;
my $char = quotemeta $flags->{-char};
return '(?:^$char+$)';
}, matches => sub {my ($self, $str) = @;
return $str !~ /[^$self->{flags}{-char}]/;
}, subs => sub {my ($self, $str, $replacement) = @;
$[1] =~ s/^$self->{flags}{-char}+$//g;
}, ;my $asterisks = $RE{lineof}{-char=>'*'};
# DECIDING WHICH PATTERNS TO LOAD.
use Regexp::Common qw /comment number/; # Comment and number patterns.
use Regexp::Common qw /nodefaults/; # Don't load any patterns.
use Regexp::Common qw /!delimited/; # All, but delimited patterns.
DESCRIPTION
By default, this module exports a single hash (%RE) that stores or
generates commonly needed regular expressions (see "List of available patterns").There is an alternative, subroutine-based syntax described in
"Subroutine-based interface".
GGeenneerraall ssyynnttaaxx ffoorr rreeqquueessttiinngg ppaatttteerrnnssTo access a particular pattern, %RE is treated as a hierarchical hash
of hashes (of hashes...), with each successive key being an identifier. For example, to access the pattern that matches real numbers, you specify:$RE{num}{real}
and to access the pattern that matches integers:$RE{num}{int}
Deeper layers of the hash are used to specify flags: arguments that modify the resulting pattern in some way. The keys used to access these layers are prefixed with a minus sign and may have a value; if a value is given, it's done by using a multidimensional key. For example, toaccess the pattern that matches base-2 real numbers with embedded
commas separating groups of three digits (e.g. 10,101,110.110101101):$RE{num}{real}{-base => 2}{-sep => ','}{-group => 3}
Through the magic of Perl, these flag layers may be specified in any order (and even interspersed through the identifier keys!) so you could get the same pattern with:$RE{num}{real}{-sep => ','}{-group => 3}{-base => 2}
or:$RE{num}{-base => 2}{real}{-group => 3}{-sep => ','}
or even:$RE{-base => 2}{-group => 3}{-sep => ','}{num}{real}
etc. Note, however, that the relative order of amongst the identifier keys is significant. That is:$RE{list}{set}
would not be the same as:$RE{set}{list}
FFllaagg ssyynnttaaxx In versions prior to 2.113, flags could also be written as"{"-flag=value"}". This no longer works, although "{"-flag$;value"}"
still does. However, "{-flag => 'value'}" is the preferred syntax.
UUnniivveerrssaall ffllaaggss Normally, flags are specific to a single pattern. However, there is two flags that all patterns may specify."-keep"
By default, the patterns provided by %RE contain no capturing
parentheses. However, if the "-keep" flag is specified (it requires
no value) then any significant substrings that the pattern matches are captured. For example:if ($str =~ $RE{num}{real}{-keep}) {
$number = $1;
$whole = $3;
$decimals = $5;
} Special care is needed if a "kept" pattern is interpolated into a larger regular expression, as the presence of other capturing parentheses is likely to change the "number variables" into which significant substrings are saved. See also "Adding new regular expressions", which describes how to create new patterns with "optional" capturing brackets that respondto "-keep".
"-i"
Some patterns or subpatterns only match lowercase or uppercase letters. If one wants the do case insensitive matching, one option is to use the "/i" regexp modifier, or the special sequence "(?i)". But if the functional interface is used, one does not have thisoption. The "-i" switch solves this problem; by using it, the
pattern will do case insensitive matching. OOOO iinntteerrffaaccee aanndd iinnlliinnee mmaattcchhiinngg//ssuubbssttiittuuttiioonnThe patterns returned from %RE are objects, so rather than writing:
if ($str =~ /$RE{some}{pattern}/ ) {...}
you can write:if ( $RE{some}{pattern}->matches($str) ) {...}
For matching this would seem to have no great advantage apart from readability (but see below). For substitutions, it has other significant benefits. Frequently you want to perform a substitution on a string without changing the original. Most people use this:$changed = $original;
$changed =~ s/$RE{some}{pattern}/$replacement/;
The more adept use:($changed = $original) =~ s/$RE{some}{pattern}/$replacement/;
Regexp::Common allows you do write this:
$changed = $RE{some}{pattern}->subs($original=>$replacement);
Apart from reducing precedence-angst, this approach has the added
advantages that the substitution behaviour can be optimized from the regular expression, and the replacement string can be provided by default (see "Adding new regular expressions"). For example, in the implementation of this substitution:$cropped = $RE{ws}{crop}->subs($uncropped);
the default empty string is provided automatically, and the substitution is optimized to use:$uncropped =~ s/^\s+//;
$uncropped =~ s/\s+$//;
rather than:$uncropped =~ s/^\s+|\s+$//g;
SSuubbrroouuttiinnee-bbaasseedd iinntteerrffaaccee
The hash-based interface was chosen because it allows regexes to be
effortlessly interpolated, and because it also allows them to be "curried". For example:my $num = $RE{num}{int};
my $commad = $num->{-sep=>','}{-group=>3};
my $duodecimal = $num->{-base=>12};
However, the use of tied hashes does make the access to Regexp::Common
patterns slower than it might otherwise be. In contexts whereimpatience overrules laziness, Regexp::Common provides an additional
subroutine-based interface.
For each (sub-)entry in the %RE hash ($RE{key1}{key2}{etc}), there is a
corresponding exportable subroutine: "REkey1key2etc()". The name ofeach subroutine is the underscore-separated concatenation of the non-
flag keys that locate the same pattern in %RE. Flags are passed to the
subroutine in its argument list. Thus:use Regexp::Common qw( REwscrop REnumreal REprofanity );
$str =~ REwscrop() and die "Surrounded by whitespace";
$str =~ REnumreal(-base=>8, -sep=>" ") or next;
$offensive = REprofanity(-keep);
$str =~ s/$offensive/$bad{$1}++; "
"/ge; Note that, unlike the hash-based interface (which returns objects),
these subroutines return ordinary "qr"'d regular expressions. Hence they do not curry, nor do they provide the OO match and substitution inlining described in the previous section. It is also possible to export subroutines for all available patterns like so:use Regexp::Common 'REALL';
Or you can export all subroutines with a common prefix of keys like so:use Regexp::Common 'REnumALL';
which will export "REnumint" and "REnumreal" (and if you have create more patterns who have first key num, those will be exported as well). In general, REkey1...keynALL will export all subroutines whose pattern names have first keys key1 ... keyn. AAddddiinngg nneeww rreegguullaarr eexxpprreessssiioonnssYou can add your own regular expressions to the %RE hash at run-time,
using the exportable "pattern" subroutine. It expects a hash-like list
of key/value pairs that specify the behaviour of the pattern. The various possible argument pairs are: "name => [ @list ]" A required argument that specifies the name of the pattern, and any flags it may take, via a reference to a list of strings. For example:pattern name => [qw( line of -char )],
# other args here
;This specifies an entry $RE{line}{of}, which may take a "-char"
flag. Flags may also be specified with a default value, which is then used whenever the flag is omitted, or specified without an explicit value. For example:pattern name => [qw( line of -char= )],
# default char is ''
# other args here
;"create => $subreforstring"
A required argument that specifies either a string that is to be returned as the pattern: pattern name => [qw( line of underscores )],create => q/(?:^+$)/
; or a reference to a subroutine that will be called to create the pattern:pattern name => [qw( line of -char= )],
create => sub {my ($self, $flags) = @;
my $char = quotemeta $flags->{-char};
return '(?:^$char+$)';
}, ; If the subroutine version is used, the subroutine will be called with three arguments: a reference to the pattern object itself, a reference to a hash containing the flags and their values, and areference to an array containing the non-flag keys.
Whatever the subroutine returns is stringified as the pattern. No matter how the pattern is created, it is immediately postprocessed to include or exclude capturing parentheses(according to the value of the "-keep" flag). To specify such
"optional" capturing parentheses within the regular expression associated with "create", use the notation "(?k:...)". Any parentheses of this type will be converted to "(...)" when the"-keep" flag is specified, or "(?:...)" when it is not. It is a
Regexp::Common convention that the outermost capturing parentheses
always capture the entire pattern, but this is not enforced."matches => $subref"
An optional argument that specifies a subroutine that is to becalled when the "$RE{...}->matches(...)" method of this pattern is
invoked. The subroutine should expect two arguments: a reference to the pattern object itself, and the string to be matched against. It should return the same types of values as a "m/.../" does.pattern name => [qw( line of -char )],
create => sub {...}, matches => sub {my ($self, $str) = @;
$str !~ /[^$self->{flags}{-char}]/;
}, ;"subs => $subref"
An optional argument that specifies a subroutine that is to becalled when the "$RE{...}->subs(...)" method of this pattern is
invoked. The subroutine should expect three arguments: a reference to the pattern object itself, the string to be changed, and the value to be substituted into it. The third argument may be "undef", indicating the default substitution is required. The subroutine should return the same types of values as an "s/.../.../" does. For example:pattern name => [ 'lineof', '-char=' ],
create => sub {...}, subs => sub {my ($self, $str, $ignorereplacement) = @;
$[1] =~ s/^$self->{flags}{-char}+$//g;
}, ;Note that such a subroutine will almost always need to modify $[1]
directly."version => $minimumperlversion"
If this argument is given, it specifies the minimum version of perl required to use the new pattern. Attempts to use the pattern with earlier versions of perl will generate a fatal diagnostic. LLooaaddiinngg ssppeecciiffiicc sseettss ooff ppaatttteerrnnss.. By default, all the sets of patterns listed below are made available. However, it is possible to indicate which sets of patterns should bemade available - the wanted sets should be given as arguments to "use".
Alternatively, it is also possible to indicate which sets of patternsshould not be made available - those sets will be given as argument to
the "use" statement, but are preceeded with an exclaimation mark. The argument nodefaults indicates none of the default patterns should be made available. This is useful for instance if all you want is the "pattern()" subroutine. Examples:use Regexp::Common qw /comment number/; # Comment and number patterns.
use Regexp::Common qw /nodefaults/; # Don't load any patterns.
use Regexp::Common qw /!delimited/; # All, but delimited patterns.
It's also possible to load your own set of patterns. If you have amodule "Regexp::Common::mypatterns" that makes patterns available, you
can have it made available withuse Regexp::Common qw /mypatterns/;
Note that the default patterns will still be made available - only if
you use nodefaults, or mention one of the default sets explicitely, the non mentioned defaults aren't made available. LLiisstt ooff aavvaaiillaabbllee ppaatttteerrnnss The patterns listed below are currently available. Each set of patterns has its own manual page describing the details. For each pattern setnamed name, the manual page Regexp::Common::name describes the details.
Currently available are:Regexp::Common::balanced
Provides regexes for strings with balanced parenthesized delimiters.Regexp::Common::comment
Provides regexes for comments of various languages (43 languages currently).Regexp::Common::delimited
Provides regexes for delimited strings.Regexp::Common::lingua
Provides regexes for palindromes.Regexp::Common::list
Provides regexes for lists.Regexp::Common::net
Provides regexes for IPv4 addresses and MAC addresses.Regexp::Common::number
Provides regexes for numbers (integers and reals).Regexp::Common::profanity
Provides regexes for profanity.Regexp::Common::whitespace
Provides regexes for leading and trailing whitespace.Regexp::Common::zip
Provides regexes for zip codes. FFoorrtthhccoommiinngg ppaatttteerrnnss aanndd ffeeaattuurreess Future releases of the module will also provide patterns for the following: * email addresses * HTML/XML tags * more numerical matchers, * mail headers (including multiline ones), * more URLS * telephone numbers of various countries* currency (universal 3 letter format, Latin-1, currency names)
* dates * binary formats (e.g. UUencoded, MIMEd) If you have other patterns or pattern generators that you think wouldbe generally useful, please send them to the maintainer - preferably
as source code using the "pattern" subroutine. Submissions that include a set of tests will be especially welcome. DIAGNOSTICS"Can't export unknown subroutine %s"
The subroutine-based interface didn't recognize the requested
subroutine. Often caused by a spelling mistake or an incompletely specified name."Can't create unknown regex: $RE{...}"
Regexp::Common doesn't have a generator for the requested pattern.
Often indicates a mispelt or missing parameter."Perl %f does not support the pattern $RE{...}. You need Perl %f or
later" The requested pattern requires advanced regex features (e.g. recursion) that not available in your version of Perl. Time to upgrade. "pattern() requires argument: name => [ @list ]"Every user-defined pattern specification must have a name.
"pattern() requires argument: create => $subreforstring"
Every user-defined pattern specification must provide a pattern
creation mechanism: either a pattern string or a reference to a subroutine that returns the pattern string. "Base must be between 1 and 36"The $RE{num}{real}{-base=>'N'} pattern uses the characters [0-9A-Z]
to represent the digits of various bases. Hence it only produces regular expressions for bases up to hexatricensimal."Must specify delimiter in $RE{delimited}"
The pattern has no default delimiter. You need to write:$RE{delimited}{-delim=>X'} for some character X
AACCKKNNOOWWLLEEDDGGEEMMEENNTTSS Deepest thanks to the many people who have encouraged and contributed to this project, especially: Elijah, Jarkko, Tom, Nat, Ed, and Vivek. HISTORY$Log: Common.pm,v $
Revision 2.120 2005/03/16 00:24:45 abigail Load Carp only on demand Revision 2.119 2005/01/01 16:35:14 abigail- Updated copyright notice. New release.
Revision 2.118 2004/12/14 23:17:57 abigail Fixed the generic OO routines. Revision 2.117 2004/06/30 15:01:35 abigail Pod nits. (Jim Cromie) Revision 2.116 2004/06/30 09:37:36 abigail New version Revision 2.115 2004/06/09 21:58:01 abigail- 'SEN'
- New release.
Revision 2.114 2003/05/25 21:34:56 abigail POD nits from Bryan C. Warnock Revision 2.113 2003/04/02 21:23:48 abigailRemoved anything related to $; being '='
Revision 2.112 2003/03/25 23:27:27 abigail New release Revision 2.111 2003/03/12 22:37:13 abigail+ The -i switch.
+ New release. Revision 2.110 2003/02/21 14:55:31 abigail New release Revision 2.109 2003/02/10 21:36:58 abigail New release Revision 2.108 2003/02/09 21:45:07 abigail New release Revision 2.107 2003/02/07 15:23:03 abigail New release Revision 2.106 2003/02/02 17:44:58 abigail New release Revision 2.105 2003/02/02 03:20:32 abigail New release Revision 2.104 2003/01/24 15:43:40 abigail New release Revision 2.103 2003/01/23 02:19:01 abigail New release Revision 2.102 2003/01/22 17:32:34 abigail New release Revision 2.101 2003/01/21 23:52:18 abigail POD fix. Revision 2.100 2003/01/21 23:19:40 abigail The whole world understands RCS/CVS version numbers, that 1.9 is an older version than 1.10. Except CPAN. Curse the idiot(s) who think that version numbers are floats (in which universe do floats have more than one decimal dot?). Everything is bumped to version 2.100 because CPAN couldn't deal with the fact one file had version 1.10. Revision 1.30 2003/01/17 13:19:04 abigail New release Revision 1.29 2003/01/16 11:08:41 abigail New release Revision 1.28 2003/01/01 23:03:53 abigail New distribution Revision 1.27 2003/01/01 17:09:07 abigail lingua class added Revision 1.26 2002/12/30 23:08:28 abigailNew module Regexp::Common::zip
Revision 1.25 2002/12/27 23:34:44 abigail New release Revision 1.24 2002/12/24 00:00:04 abigail New release Revision 1.23 2002/11/06 13:50:23 abigail Minor POD changes. Revision 1.22 2002/10/01 18:25:46 abigail POD buglets. Revision 1.21 2002/09/18 17:46:11 abigail POD Typo fix (Douglas Hunter) Revision 1.20 2002/08/27 17:04:29 abigail VERSION is now extracted from the CVS revision number. Revision 1.19 2002/08/06 14:46:49 abigail Upped version number to 0.09. Revision 1.18 2002/08/06 13:50:08 abigail- Added HISTORY section with CVS log.
- Upped version number to 0.08.
Revision 1.17 2002/08/05 12:21:46 abigail Upped version number to 0.07. Revision 1.16 2002/08/05 12:16:30 abigail Fixed 'Regex::' typo to 'Regexp::' (Found my Mike Castle). Revision 1.15 2002/08/04 22:56:02 abigail Upped version number to 0.06. Revision 1.14 2002/08/04 19:33:33 abigail Loaded URI by default. Revision 1.13 2002/08/01 10:02:42 abigail Upped version number. Revision 1.12 2002/07/31 23:26:06 abigail Upped version number. Revision 1.11 2002/07/31 13:11:20 abigail Removed URL from the list of default loaded regexes, as this one isn't ready yet. Upped the version number to 0.03. Revision 1.10 2002/07/29 13:16:38 abigail Introduced 'use strict' (which uncovered a bug, \@nonflags was usedwhen $spec{create} was called instead of \@nonflags).
Turned warnings on (using local $^W = 1; "use warnings" isn't available
in pre 5.6). Revision 1.9 2002/07/28 23:02:54 abigail Split out the remaining pattern groups to separate files.Fixed a bug in decache, changed the regex /$fpat=(.+)/ to
/$fpat=(.*)/, to be able to distinguish the case of a flag
set to the empty string, or a flag without an argument. Added 'undef' to @ in the subinterface setting to avoid a warning of setting a hash with an odd number of arguments. POD fixes. Revision 1.8 2002/07/25 23:55:54 abigail Moved balanced, net and URL to separate files. Revision 1.7 2002/07/25 20:01:40 abigail Modified import() to deal with factoring out groups of related regexes. Factored out comments into Common/comment. Revision 1.6 2002/07/23 21:20:43 abigail Upped version number to 0.02. Revision 1.5 2002/07/23 21:14:55 abigailAdded $RE{comment}{HTML}.
Revision 1.4 2002/07/23 17:01:09 abigail Added lines about new maintainer, and an email address to submit bugs and new regexes to. Revision 1.3 2002/07/23 13:58:58 abigail Changed various occurences of C<... => ...> into C<< ... => ... >>. Revision 1.2 2002/07/23 12:27:07 abigail Line 733 was missing the closing > of a C<> in the POD. Revision 1.1 2002/07/23 12:22:51 abigail Initial revision AUTHOR Damian Conway (damian@conway.org) MMAAIINNTTAAIINNAANNCCEEThis package is maintained by Abigail (regexp-common@abigail.nl).
BUGS AND IRRITATIONS
Bound to be plenty. For a start, there are many common regexes missing. Send them in toregexp-common@abigail.nl.
COPYRIGHTCopyright (c) 2001 - 2005, Damian Conway and Abigail. All Rights
Reserved. This module is free software. It may be used, redistributed and/or modified under the terms of the Perl Artistic License (see http://www.perl.com/perl/misc/Artistic.html) PPOODD EERRRROORRSS e! The above document had some coding errors, which are explained bbeellooww:: Around line 446: You forgot a '=back' before '=head2'perl v5.8.8 2005-03-15 Regexp::Common(3)