]
Enable-NetIPsecMainModeRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallProfile [-Confirm]
[-WhatIf] []
Enable-NetIPsecMainModeRule [-AsJob] [-CimSession ] [-Description ] [-DisplayGroup
] [-Enabled ] [-GPOSession ] [-Group ] [-MainModeCryptoSet ]
[-PassThru] [-Phase1AuthSet ] [-PolicyStore ] [-PolicyStoreSource ]
[-PolicyStoreSourceType ] [-PrimaryStatus ] [-Status ]
[-ThrottleLimit ] [-TracePolicyStore] [-Confirm] [-WhatIf] []
Enable-NetIPsecMainModeRule [-AsJob] [-CimSession ] [-PassThru] [-ThrottleLimit ]
-InputObject [-Confirm] [-WhatIf] []
Enable-NetIPsecMainModeRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallAddressFilter
[-Confirm] [-WhatIf] []
DESCRIPTION
The Enable-NetIPsecMainModeRule cmdlet enables a previously disabled main mode rule to be active within the
computer or a group policy organizational unit. To disable a rule, use the Disable-NetIPsecMainModeRule cmdlet.
This cmdlet gets one or more main mode rules to be enabled with the Name parameter (default), the DisplayName
parameter, rule properties, or by associated filters or objects. The Enabled parameter value for the resulting
queried rules is set to True.
PARAMETERS
-All []
Indicates that all of the main mode rules within the specified policy store are enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob []
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You
can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get
the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShellr background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AssociatedNetFirewallAddressFilter
Gets the main mode rules that are associated with the given address filter to be enabled.
A NetFirewallAddressFilter object represents the address conditions associated with a rule. See the
Get-NetFirewallAddressFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallProfile
Gets the main mode rules that are associated with the given firewall profile type to be enabled.
A NetFirewallProfile object represents the profile conditions associated with a rule. See the
Get-NetFirewallProfile cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetIPsecMainModeCryptoSet
Gets the main mode rules that are associated, via the pipeline, with the input main mode cryptographic set to
be enabled.
A NetIPsecMainModeCryptoSet object represents a main mode cryptographic conditions associated with a main mode
rule. This parameter sets the methods for the main mode negotiation by describing the proposals for
encryption. See the Get-NetIPsecMainModeCryptoSet cmdlet for more information.
Alternatively, the MainModeCryptoSet parameter can be used for the same purpose, but does not allow the
cryptographic set to be piped into this cmdlet and the set must be specified with the Name parameter.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetIPsecPhase1AuthSet
Gets the IPsec rules that are associated with the given phase 1 authentication set to be enabled.
A NetIPsecPhase1AuthSet object represents the phase 1 authorization set conditions associated with an IPsec or
main mode rule. This parameter sets the methods for main mode negotiation by describing the proposals for
computer authentication. See the Get-NetIPsecPhase1AuthSet cmdlet for more information.
Alternatively, the Phase1AuthSet parameter can be used for the same purpose, but does not allow the
authentication set to be piped into the cmdlet and the set must be specified with the Name parameter.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description
Specifies that matching main mode rules of the indicated description are enabled. Wildcard characters are
accepted.
This parameter provides information about the main mode rule. This parameter specifies the localized,
user-facing description of the IPsec rule.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayGroup
Specifies that only matching main mode rules of the indicated group association are enabled. Wildcard
characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a
localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize
rules by influence and allows batch rule modifications. Using the Set-NetIPsecMainModeRule cmdlet, if the
group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the
same set of modifications. It is good practice to specify the Group parameter value with a universal and
world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecMainModeRule cmdlet, but
can be modified using dot-notation and the Set-NetIPsecMainModeRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName
Specifies that only matching main mode rules of the indicated display name are enabled. Wildcard characters
are accepted.
Specifies the localized, user-facing name of the main mode rule being created. When creating a rule this
parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter
value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name
parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter cannot be set to All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Enabled
Specifies that matching main mode rules of the indicated state are enabled.
This parameter specifies that the rule object is administratively enabled or administratively enabled. The
acceptable values for this parameter are:
-- True: Specifies the rule is currently enabled.
-- False: Specifies the rule is currently disabled. A disabled rule will not actively modify computer
behavior, but the management construct still exists on the computer so it can be re-enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession
Specifies the network Group Policy Object (GPO) from which to retrieve the rules to be enabled.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows
PowerShellr, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy
Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto
the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC
and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO
Session, use the Save-NetGPO cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group
Specifies that only matching main mode rules of the indicated group association are enabled. Wildcard
characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value
is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize
rules by influence and allows batch rule modifications. Using the Set-NetIPsecMainModeRule cmdlets, if the
group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the
same set of modifications. It is good practice to specify this parameter value with a universal and
world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecMainModeRule
cmdlet, but can be modified using dot-notation and the Set-NetIPsecMainModeRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-MainModeCryptoSet
Gets the IPsec main mode rules that are associated with the given main mode cryptographic set to be enabled.
Specifies, by Name, the main mode cryptographic set to be associated with the main mode rule.
A NetIPsecMainModeCryptoSet object represents a main mode cryptographic conditions associated with a main mode
rule. This parameter sets the methods for main mode negotiation by describing the proposals for encryption.
This is only associated with main mode rules. See the Get-NetIPsecMainModeCryptoSet cmdlet for more
information. Alternatively, the AssociatedNetIPsecMainModeCryptoSet parameter can be used for the same
purpose, but is used to pipe the input set into the rule.
Note: When specifying cryptographic sets, the Name parameter value of the cryptographic set must be used. The
object cannot be directly passed into this cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Name
Specifies that only matching main mode rules of the indicated name are enabled. Wildcard characters are
accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store
at a time. During group policy processing and policy merge, rules that have the same name but come from
multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is
desirable if the rules serve the same purpose. For instance, all of the main mode rules have specific names,
so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a
local computer. GPOs can have precedence. So if an administrator has a different or more specific rule with
the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for main mode encryption need to overridden, specify the customized parameters and set this
parameter, making this parameter the new default setting for encryption.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru []
Returns an object representing the item with which you are working. By default, this cmdlet does not generate
any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Phase1AuthSet
Gets the main mode rules that are associated with the given phase 1 authentication set to be enabled.
This parameter specifies, by name, the Phase 1 authentication set to be associated with the main mode rule.
A NetIPsecPhase1AuthSet object represents the phase 1 authentication conditions associated with an IPsec or
main mode rule. This parameter sets the methods for main mode negotiation by describing the proposals for
computer authentication. See the New-NetIPsecAuthProposal cmdlet of more information. Alternatively, the
AssociatedNetIPsecPhase1AuthSet parameter can be used for the same purpose, but is used to pipe the input set
into the rule.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore
Targets the policy store from which to retrieve the rules to be enabled.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:ÿ
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local
computer. This policy is not from GPOs, and has been created manually or programmatically (during application
installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on
the system immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that
apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs
that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening
(WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ -PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ -PolicyStore domain.fqdn.com\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of main mode rules that ship with Windows
Serverr 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows
Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the
purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for
third-party services. In addition, network isolation rules that are created for Windows Store application
containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecMainModeRule cmdlet cannot be used to add an object to a policy store. An object can
only be added to a policy store at creation time with the Copy-NetIPsecMainModeRule cmdlet or with the
New-NetIPsecMainModeRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSource
Specifies that main mode rules matching the indicated policy store source are enabled.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from
the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated
and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This
parameter value cannot always be passed into the PolicyStore parameter. Domain GPOs are one example in which
this parameter contains only the GPO name, not the domain name.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSourceType
Specifies that main mode rules that match the indicated policy store source type are enabled.
This parameter describes the type of policy store where the rule originated if the object is retrieved from
the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated
and should not be modified.
The acceptable values for this parameter are:ÿ
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use
in the cmdlets, but may appear when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in the
cmdlets, but may appear when monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in the cmdlets, but may
appear when monitoring active policy.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrimaryStatus
Specifies that main mode rules that match the indicated primary status are enabled.
This parameter specifies the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Status
Specifies that main mode rules that match the indicated status are enabled.
This parameter describes the status message for the specified status code value. The status code is a
numerical value that indicates any syntax, parsing, or runtime errors in the rule or set. This parameter value
should not be modified.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShellr calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TracePolicyStore []
Indicates that the main mode rules that match the indicated policy store are enabled.
This parameter specifies that the name of the source GPO is set to the PolicyStoreSource parameter value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm []
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf []
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\AssociatedNetIPsecMainModeCryptoSet
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIKEP1AuthSet
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetMainModeRule[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
OUTPUTS
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetMainModeRule[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
EXAMPLE 1
PS C:\>Enable-NetIPsecMainModeRule -DisplayName "Main Mode Rule" -PolicyStore domain.contoso.com\gpo
This example enables a main mode rule in a GPO given the localized name.
EXAMPLE 2
PS C:\>Enable-NetIPsecMainModeRule -Group "DA Client" -PolicyStore ActiveStore
This example enables all of the main mode client DA rules on the local computer.
EXAMPLE 3
PS C:\>$Phase1AuthSet = Get-NetIPsecPhase1AuthSet -DisplayName "Computer Kerb, CA Auth"
PS C:\>Enable-NetIPsecMainModeRule -InputObject $Phase1AuthSet
This example enables all of the main mode rules associated with the phase 1 authorization set.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=229103
Copy-NetIPsecMainModeRule
Disable-NetIPsecMainModeRule
Get-NetFirewallAddressFilter
Get-NetFirewallProfile
Get-NetIPsecMainModeCryptoSet
Get-NetIPsecPhase1AuthSet
New-NetIPsecMainModeRule
Open-NetGPO
Save-NetGPO
Set-NetIPsecMainModeRule
New-NetIPsecAuthProposal
New-GPO