Windows PowerShell command on Get-command Get-NetAdapterLso

NAME
    Get-NetAdapterLso
    
SYNOPSIS
    Gets the LSO properties of the network adapter.
    
    
SYNTAX
    Get-NetAdapterLso [[-Name] ] [-AsJob] [-CimSession ] [-IncludeHidden] [-ThrottleLimit 
    ] []
    
    Get-NetAdapterLso [-AsJob] [-CimSession ] [-IncludeHidden] [-ThrottleLimit ] 
    -InterfaceDescription  []
    
    
DESCRIPTION
    The Get-NetAdapterLso cmdlet gets the state of large send offload (LSO) settings on the network adapter. LSO is a 
    technology where the work of segmenting data into network frames is performed by the network adapter instead of by 
    the TCP/IP stack. With LSO, TCP/IP sends very large data packets down to the network adapter driver and the 
    network adapter hardware. The network adapter breaks up the data into smaller network-sized frames. This increases 
    the speed of high-end send operations and decreases the processor usage of the computer, because the work is 
    performed on the network adapter.
    

PARAMETERS
    -AsJob []
        ps_cimcommon_asjob
        
        Required?                    false
        Position?                    named
        Default value                
        Accept pipeline input?       false
        Accept wildcard characters?  false
        
    -CimSession 
        Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such 
        as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local 
        computer.
        
        Required?                    false
        Position?                    named
        Default value                
        Accept pipeline input?       false
        Accept wildcard characters?  false
        
    -IncludeHidden []
        Indicates that the cmdlet includes both visible and hidden network adapters in the operation. By default only 
        visible network adapters are included. If a wildcard character is used in identifying a network adapter and 
        this parameter has been specified, then the wildcard string is matched against both hidden and visible network 
        adapters.
        
        Required?                    false
        Position?                    named
        Default value                
        Accept pipeline input?       false
        Accept wildcard characters?  false
        
    -InterfaceDescription 
        Specifies an array of network adapter interface descriptions. For a physical network adapter this is typically 
        the vendor name of the network adapter followed by a part number and description, such as Contoso 12345 
        Gigabit Network Device.
        
        Required?                    true
        Position?                    named
        Default value                
        Accept pipeline input?       true (ByPropertyName)
        Accept wildcard characters?  true
        
    -Name 
        Specifies an array of network adapter names.
        
        Required?                    false
        Position?                    1
        Default value                
        Accept pipeline input?       true (ByPropertyName)
        Accept wildcard characters?  true
        
    -ThrottleLimit 
        Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this 
        parameter is omitted or a value of 0 is entered, then Windows PowerShellr calculates an optimum throttle limit 
        for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies 
        only to the current cmdlet, not to the session or to the computer.
        
        Required?                    false
        Position?                    named
        Default value                
        Accept pipeline input?       false
        Accept wildcard characters?  false
        
    
        This cmdlet supports the common parameters: Verbose, Debug,
        ErrorAction, ErrorVariable, WarningAction, WarningVariable,
        OutBuffer, PipelineVariable, and OutVariable. For more information, see 
        about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216). 
    
INPUTS
        None
    
        
    
    
OUTPUTS
        Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter LsoSettingData
    
        The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management 
        Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the 
        underlying WMI object.
    
    
    Example 1: Get the LSO properties for the specified network adapter
    
    PS C:\>Get-NetAdapterLso -Name "MyAdapter"
    
    This command gets the LSO properties of the network adapter named MyAdapter.
    
    
    Example 2: Display all the LSO properties for the specified network adapter
    
    PS C:\>Get-NetAdapterLso -Name "MyAdapter" | Format-List -Property "*"
    
    This command displays all of the LSO properties of the network adapter named MyAdapter.
    
    
    Example 3: Get all network adapters that have LSO enabled
    
    PS C:\>Get-NetAdapterLso -Name "*" | Where-Object -FilterScript { $_.Enabled }
    
    This command gets all network adapters with LSO enabled.
    
    
    
RELATED LINKS
    Online Version: 
    Disable-NetAdapterLso 
    Enable-NetAdapterLso 
    Set-NetAdapterLso