]
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallInterfaceTypeFilter
-NewName [-Confirm] [-WhatIf] []
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -DisplayName -NewName [-Confirm]
[-WhatIf] []
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallServiceFilter -NewName
[-Confirm] [-WhatIf] []
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallPortFilter -NewName
[-Confirm] [-WhatIf] []
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallSecurityFilter -NewName
[-Confirm] [-WhatIf] []
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallApplicationFilter
-NewName [-Confirm] [-WhatIf] []
Rename-NetFirewallRule [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru] [-PolicyStore
] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetFirewallAddressFilter -NewName
[-Confirm] [-WhatIf] []
DESCRIPTION
The Rename-NetFirewallRule cmdlet renames an existing firewall rule. When creating a rule, if the Name parameter
is not specified, then a random GUID is used. This cmdlet specifies a friendly and descriptive rule name. Note:
The newly specified name, using the NewName parameter, must still be unique since it identifies a single rule
object on the computer.
This cmdlet gets one or more firewall rules to be renamed with the Name parameter (default), the DisplayName
parameter, rule properties, or by associated filters or objects. The Name parameter value for the resulting query
is replaced by the specified NewName parameter value. Note: Only one firewall can be renamed at a time when
copying to the same policy store. This is because only a single firewall can use the unique identifier, or name,
as specified by the NewName parameter.
To modify the localized DisplayName parameter, run the Set-NetFirewallRule cmdlet with the NewDisplayName
parameter.
The names are unique identifiers for rules, similar to file names. Each name must be unique within a given policy
store. If rules in multiple GPOs have the same name, then one will overwrite the other based upon GPO precedence.
If a rule from a GPO has the same name as a rule from the PersistentStore, then the rule from the GPO will
overwrite the local rule. This can be used to create overlapping policies, where the same rule is placed in
multiple GPOs, and if they are both applied to a computer, then the overlapping parts of the policies will only be
created once. For this reason, two rules should only have the same name if the rules perform the same function.
For instance, if the built-in local firewall rules (like Core Networking, or File & Printer Sharing rules) are
copied to a domain GPO, then the rules will override any local versions of those rules. However, if different GPOs
specify different scopes with the same rule names, then the rules will become much harder to effectively manage.
PARAMETERS
-Action
Specifies that matching firewall rules of the indicated action are renamed.
Gets the firewall rules that have the corresponding action value.
This parameter specifies the action to take on traffic that matches this rule.
The acceptable values for this parameter are:ÿ Allow or Block.
-- Allow: Network packets that match all of the criteria specified in this rule are permitted through the
firewall.
-- Block: Network packets that match all of the criteria specified in this rule are dropped by the firewall.
The default value is Allow.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-All []
Indicates that all of the firewall rules within the specified policy store are renamed.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob []
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You
can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get
the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShellr background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AssociatedNetFirewallAddressFilter
Gets the firewall rules that are associated with the given address filter to be renamed.
A NetFirewallAddressFilter object represents the address conditions associated with a rule. See the
Get-NetFirewallAddressFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallApplicationFilter
Gets the firewall rules that are associated with the given application filter to be renamed.
A NetFirewallApplicationFilter object represents the applications associated with a rule. See the
Get-NetFirewallApplicationFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallInterfaceFilter
Gets the firewall rules that are associated with the given interface filter to be renamed.
A NetFirewallInterfaceFilter object represents the interface conditions associated with a rule. See the
Get-NetFirewallInterfaceFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallInterfaceTypeFilter
Gets the firewall rules that are associated with the given interface type filter to be renamed.
A NetFirewallInterfaceTypeFilter object represents the interface conditions associated with a rule. See the
Get-NetFirewallInterfaceTypeFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallPortFilter
Gets the firewall rules that are associated with the given port filter to be renamed.
A NetFirewallPortFilter object represents the port conditions associated with a rule. See the
Get-NetFirewallPortFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallProfile
Gets the firewall rules that are associated with the given firewall profile type to be renamed.
A NetFirewallProfile object represents the profile conditions associated with a rule. See the
Get-NetFirewallProfile cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallSecurityFilter
Gets the firewall rules that are associated with the given security filter to be renamed.
A NetFirewallSecurityFilter object represents the security conditions associated with a rule. See the
Get-NetFirewallSecurityFilter cmdlet for more information. The security conditions include the Authentication,
Encryption, LocalUser, RemoteUser, and RemoteMachine parameters.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetFirewallServiceFilter
Gets the firewall rules that are associated with the given service filter to be renamed.
A NetFirewallServiceFilter object represents the profile conditions associated with a rule. See the
Get-NetFirewallServiceFilter cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description
Specifies that matching firewall rules of the indicated description are renamed. Wildcard characters are
accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized,
user-facing description of the IPsec rule.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Direction
Specifies that matching firewall rules of the indicated direction are renamed.
This parameter specifies which direction of traffic to match with this rule.
The acceptable values for this parameter are:ÿ Inbound or Outbound.
The default value is Inbound.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayGroup
Specifies that only matching firewall rules of the indicated group association are renamed. Wildcard
characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a
localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize
rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlet, if the group
name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set
of modifications. It is a good practice to specify the Group parameter value with a universal and world-ready
indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be
modified using dot-notation and the Set-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName
Specifies that only matching firewall rules of the indicated display name are renamed. Wildcard characters are
accepted.
Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this
parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter
value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name
parameter should be used instead, where the default value is a randomly assigned value. Note: This parameter
cannot be set to All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-EdgeTraversalPolicy
Specifies that matching firewall rules of the indicated edge traversal policy are renamed.
This parameter specifies how this firewall rule will handle edge traversal cases. Edge traversal allows the
computer to accept unsolicited inbound packets that have passed through an edge device, such as a network
address translation (NAT) router or firewall. This option applies to inbound rules only.
The acceptable values for this parameter are:ÿ Block, Allow, DeferToUser, or DeferToApp
-- Block: Prevents applications from receiving unsolicited traffic from the Internet through a NAT edge
device.
-- Allow: Allows applications to receive unsolicited traffic directly from the Internet through a NAT edge
device.
-- DeferToUser: Allows the user to decide whether to allow unsolicited traffic from the Internet through a
NAT edge device when an application requests it.
-- DeferToApp: Allows each application to determine whether to allow unsolicited traffic from the Internet
through a NAT edge device.
-- The default value is Block.
Note: The DeferToApp and DeferToUser options are only valid for computers running Windowsr7, WindowsServerr2008
R2, and Windows Serverr 2012.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Enabled
Specifies that matching firewall rules of the indicated state are renamed.
This parameter specifies that the rule object is administratively enabled or administratively disabled. The
acceptable values for this parameter are:
-- True: Specifies the rule is currently enabled.
-- False: Specifies the rule is currently disabled. A disabled rule will not actively modify computer
behavior, but the management construct still exists on the computer so it can be re-enabled.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession
Targets the network GPO from which to retrieve the rules to be renamed.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows
PowerShellr, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy
Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto
the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC
and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO
Session, use the Save-NetGPO cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group
Specifies that only matching firewall rules of the indicated group association are renamed. Wildcard
characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value
is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize
rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlets, if the group
name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set
of modifications. It is good practice to specify this parameter value with a universal and world-ready
indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetFirewallRule
cmdlet, but can be modified using dot-notation and the Set-NetFirewallRule cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-LocalOnlyMapping
Indicates that matching firewall rules of the indicated value are renamed.
This parameter specifies the firewall rules for local only mapping, which describes whether a packet must pass
through a local address on the way to the destination.
Non-TCP traffic is session-less. Windows Firewall authorizes traffic per session, not per packet, for
performance reasons. Generally, non-TCP sessions are inferred by checking the following fields: local address,
remote address, protocol, local port, and remote port.
If this parameter is set to True, then the remote address and port will be ignored when inferring remote
sessions. Sessions will be grouped based on local address, protocol, and local port.
This is similar to the LooseSourceMapping parameter, but performs better in cases where the traffic does not
need to be filtered by remote address. This could improve performance on heavy server workloads where UDP
requests come from dynamic client ports. For instance, Teredo relay servers.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-LooseSourceMapping
Indicates that matching firewall rules of the indicated value are renamed.
This parameter specifies the firewall rules for loose source mapping, which describes whether a packet can
have a non-local source address when being forwarded to a destination.
If this parameter is set to True, then the rule accepts packets incoming from a host other than the one to
which the packets were sent. This parameter applies only to UDP protocol traffic.
The default value is False.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Name
Specifies that only matching firewall rules of the indicated name are renamed. Wildcard characters are
accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store
at a time. During group policy processing and policy merge, rules that have the same name but come from
multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is
desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so
if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local
computer. GPOs can have precedence. So if an administrator has a different or more specific rule with the same
name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for main mode encryption need to overridden, specify the customized parameters and set this
parameter, making it the new default setting for encryption.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-NewName
Specifies the new name for one or more firewall rules.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Owner
Specifies that matching firewall rules of the indicated owner are renamed.
This parameter specifies the owner of the firewall rule, represented as an SDDL string. All Windows Store
applications that require network traffic create network isolation rules (normally through installing via the
Store), where the user that installed the application is the owner. This parameter specifies that only network
packets that are authenticated as coming from or going to an owner identified in the list of accounts (SID)
match this rule.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru []
Returns an object representing the item with which you are working. By default, this cmdlet does not generate
any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore
Targets the policy store from which to retrieve the rules to be renamed.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:ÿ
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local
computer. This policy is not from GPOs, and has been created manually or programmatically (during application
installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on
the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that
apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs
that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening
(WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ -PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ -PolicyStore domain.fqdn.com\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows
Serverr 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows
Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the
purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for
third-party services. In addition, network isolation rules that are created for Windows Store application
containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be
added to a policy store at creation time with the Copy-NetFirewallRule cmdlet or with the New-NetFirewallRule
cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSource
Specifies that firewall rules matching the indicated policy store source are renamed.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from
the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated
and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This
parameter value cannot always be passed into the PolicyStore parameter. Domain GPOs are one example in which
this parameter contains only the GPO name, not the domain name.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSourceType
Specifies that firewall rules that match the indicated policy store source type are renamed.
This parameter describes the type of policy store where the rule originated if the object is retrieved from
the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated
and should not be modified.
The acceptable values for this parameter are:ÿ
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use
in cmdlets, but may appear when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in cmdlets,
but may appear when monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in cmdlets, but may
appear when monitoring active policy.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrimaryStatus
Specifies that firewall rules that match the indicated primary status are renamed.
This parameter specifies the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Status
Specifies that firewall rules that match the indicated status are renamed.
This parameter describes the status message for the specified status code value. The status code is a
numerical value that indicates any syntax, parsing, or runtime errors in the rule or set. This parameter value
should not be modified.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShellr calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TracePolicyStore []
Indicates that the firewall rules that match the indicated policy store are renamed.
This parameter specifies that the name of the source GPO is set to the PolicyStoreSource parameter value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm []
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf []
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetAddressFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetApplicationFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallProfile
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetFirewallRule
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceTypeFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetNetworkLayerSecurityFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetProtocolPortFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetServiceFilter
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
OUTPUTS
None
EXAMPLE 1
PS C:\>Rename-NetFirewallRule -Name "{ed8384a9-a78b-4d0d-8f3d-eb5615edb4a0}" -NewName
"Contoso-NETDIS-UPnPHost-Out-TCP-Active"
This example renames a firewall rule so that the identifier is descriptive and user friendly.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288202
Copy-NetFirewallRule
Disable-NetFirewallRule
Enable-NetFirewallRule
Get-NetFirewallAddressFilter
Get-NetFirewallApplicationFilter
Get-NetFirewallInterfaceFilter
Get-NetFirewallInterfaceTypeFilter
Get-NetFirewallPortFilter
Get-NetFirewallProfile
Get-NetFirewallSecurityFilter
Get-NetFirewallServiceFilter
Get-NetFirewallRule
New-NetFirewallRule
Open-NetGPO
Remove-NetFirewallRule
Save-NetGPO
Set-NetFirewallRule
Show-NetFirewallRule
New-GPO