]
Rename-NetIPsecPhase1AuthSet [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru]
[-PolicyStore ] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetIPsecRule
-NewName [-Confirm] [-WhatIf] []
Rename-NetIPsecPhase1AuthSet [-AsJob] [-CimSession ] [-Description ] [-DisplayGroup
] [-GPOSession ] [-Group ] [-PassThru] [-PolicyStore ] [-PolicyStoreSource
] [-PolicyStoreSourceType ] [-PrimaryStatus ] [-Status ]
[-ThrottleLimit ] [-TracePolicyStore] -NewName [-Confirm] [-WhatIf] []
Rename-NetIPsecPhase1AuthSet [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru]
[-PolicyStore ] [-ThrottleLimit ] [-TracePolicyStore] -DisplayName -NewName
[-Confirm] [-WhatIf] []
Rename-NetIPsecPhase1AuthSet [-AsJob] [-CimSession ] [-GPOSession ] [-PassThru]
[-PolicyStore ] [-ThrottleLimit ] [-TracePolicyStore] -AssociatedNetIPsecMainModeRule
-NewName [-Confirm] [-WhatIf] []
Rename-NetIPsecPhase1AuthSet [-AsJob] [-CimSession ] [-PassThru] [-ThrottleLimit ]
-InputObject -NewName [-Confirm] [-WhatIf] []
Rename-NetIPsecPhase1AuthSet [-Name] [-AsJob] [-CimSession ] [-GPOSession ]
[-PassThru] [-PolicyStore ] [-ThrottleLimit ] [-TracePolicyStore] -NewName [-Confirm]
[-WhatIf] []
DESCRIPTION
The Rename-NetIPsecPhase1AuthSet cmdlet renames an existing phase 1 authentication set. When creating a set, if
the Name parameter is not specified, then a random GUID is used. This cmdlet specifies a friendly and descriptive
rule name. Note: The newly specified name, using the NewName parameter, must still be unique since it identifies a
single rule object on the computer.
This cmdlet returns one or more phase 1 authentication sets to be renamed with the Name parameter (default), the
DisplayName parameter, set properties, or by associated filters or objects. The Name parameter value from the
queried set is replaced by the NewName parameter value. Note: Only one set can be renamed at a time when copying
to the same policy store. This is because only a single set can use the unique identifier, or name, specified by
the NewName parameter.
To modify the localized DisplayName parameter, run the Set-NetIPsecPhase1AuthSet cmdlet with the NewDisplayName
parameter.
The names are unique identifiers for rules, similar to file names. Each name must be unique within a given policy
store. If rules in multiple GPOs have the same name, then one will overwrite the other based upon GPO precedence.
If a rule from a GPO has the same name as a rule from the PersistentStore, then the rule from the GPO will
overwrite the local rule.
To specify a new default phase 1 authentication set, run this cmdlet to specify the default set with Name
parameter value {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE1}.
PARAMETERS
-All []
Indicates that all of the phase 1 authentication sets within the specified policy store are renamed.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AsJob []
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
The cmdlet immediately returns an object that represents the job and then displays the command prompt. You
can continue to work in the session while the job completes. To manage the job, use the *-Job cmdlets. To get
the job results, use the Receive-Job cmdlet.
For more information about Windows PowerShellr background jobs, see about_Jobs.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-AssociatedNetIPsecMainModeRule
Gets the phase 1 authentication sets that are associated, via the pipeline, with the input main mode rule to
be renamed.
A NetIPsecMainModeRule object represents a main mode rule, which alters the behavior of main mode
authentications. Main mode negotiation establishes a secure channel between two computers by determining a set
of cryptographic protection suites, exchanging keying material to establish a shared secret key, and
authenticating computer and user identities. See the Get-NetIPsecMainModeRule cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-AssociatedNetIPsecRule
Gets the phase 1 authentication sets that are associated, via the pipeline, with the input IPsec rule to be
renamed.
A NetIPsecRule object represents an IPsec rule, which determines IPsec behavior. An IPsec rule can be
associated with Phase1AuthSet, Phase2AuthSet, and NetIPsecQuickMode cryptographic sets. See the
New-NetIPsecMainModeRule cmdlet for more information.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such
as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local
computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Description
Specifies that matching phase 1 authentication sets of the indicated description are renamed. Wildcard
characters are accepted.
This parameter provides information about the phase 1 authentication rule. This parameter specifies a
localized, user-facing description of the object.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayGroup
Specifies that only matching phase 1 authentication sets of the indicated group association are renamed.
Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a
localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize
rules by influence and allows batch rule modifications. Using the Set-NetIPsecPhase1AuthSet cmdlet, if the
group name is specified for a set of rules, then all of the rules in that group receive the same set of
modifications. It is good practice to specify the Group parameter with a universal and world-ready indirect
@FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecPhase1AuthSet cmdlet, but
can be modified using dot notation and the Set-NetIPsecPhase1AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-DisplayName
Specifies that only matching phase 1 authentication sets of the indicated display name are renamed. Wildcard
characters are accepted.
This parameter specifies the localized, user-facing name of the phase 1 authentication set being created. When
creating a set this parameter is required. This parameter value is locale-dependent. If the object is not
modified, this parameter value may change in certain circumstances. When writing scripts in multi-lingual
environments, the Name parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter value cannot be All.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-GPOSession
Targets the network GPO from which to retrieve the sets to be renamed.
This parameter is used in the same way as the PolicyStore parameter. When modifying Group Policy objects
(GPOs) in Windows PowerShellr, each change to a GPO requires the entire GPO to be loaded, modified, and saved
back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a
domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the
load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO
cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Group
Specifies that only matching phase 1 authentication sets of the indicated group association are renamed.
Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value
is a localizable string, then this parameter contains an indirect string. Rule groups organizes rules by
influence and allows batch rule modifications. Using the Set-NetIPsecPhase1AuthSet cmdlet, if the group name
is specified for a set of rules, then all of the rules in that group receive the same set of modifications. It
is good practice to specify this parameter with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecPhase1AuthSet
cmdlet, but can be modified using dot notation and the Set-NetIPsecPhase1AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-InputObject
Specifies the input to this cmdlet. You can use this parameter, or you can pipe the input to this cmdlet.
Required? true
Position? named
Default value
Accept pipeline input? True (ByValue)
Accept wildcard characters? false
-Name
Specifies that only matching phase 1 authentication sets of the indicated name are renamed. Wildcard
characters are accepted.
This parameter acts just like a filename, in that only one rule with a given name may exist in a policy store
at a time. During group policy processing and policy merge, rules that have the same name but come from
multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is
desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so
if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local
computer. Since GPOs can have precedence, if an administrator that gives a rule with a different or more
specific rule the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When the defaults for phase 1 encryption are overridden, specify the customized parameters and set this
parameter value, making this parameter the new default setting for encryption.
Required? true
Position? 1
Default value
Accept pipeline input? false
Accept wildcard characters? false
-NewName
Specifies the new name for one or more phase 1 authentication sets.
Required? true
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PassThru []
Returns an object representing the item with which you are working. By default, this cmdlet does not generate
any output.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStore
Targets the policy store from which to retrieve the sets to be renamed.
A policy store is a container for firewall and IPsec policy.
The acceptable values for this parameter are:ÿ
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local
computer. This policy is not from GPOs, and has been created manually or programmatically (during application
installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on
the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that
apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs
that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening
(WSH), and the configurable WSH).
---- Group Policy Objects (GPOs) are also policy stores. Computer GPOs can be specified as follows.
------ -PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ -PolicyStore domain.fqdn.com\GPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows
Serverr 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows
Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the
purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for
third-party services. In addition, network isolation rules that are created for Windows Store application
containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecPhase1AuthSet cmdlet cannot be used to add an object to a policy store. An object can
only be added to a policy store at creation time with the Copy-NetIPsecPhase1AuthSet cmdlet or with the
New-NetIPsecPhase1AuthSet cmdlet.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSource
Specifies that phase 1 authentication sets that match the indicated policy store source are renamed.
This parameter contains a path to the policy store where the rule originated if the object is retrieved from
the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated
and should not be modified.
The monitoring output from this parameter is not completely compatible with the PolicyStore parameter. This
parameter value cannot always be passed into the PolicyStore parameter. Domain GPOs are one example in which
this parameter contains only the GPO name, not the domain name.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PolicyStoreSourceType
Specifies that phase 1 authentication sets that match the indicated policy store source type are renamed.
This parameter describes the type of policy store where the rule originated if the object is retrieved from
the ActiveStore with the TracePolicyStoreSource option set. This parameter value is automatically generated
and should not be modified.
The acceptable values for this parameter are:ÿ
-- Local: The object originates from the local store.
-- GroupPolicy: The object originates from a GPO.
-- Dynamic: The object originates from the local runtime state. This policy store name is not valid for use
in cmdlets, but may appear when monitoring active policy.
-- Generated: The object was generated automatically. This policy store name is not valid for use in cmdlets,
but may appear when monitoring active policy.
-- Hardcoded: The object was hard-coded. This policy store name is not valid for use in cmdlets, but may
appear when monitoring active policy.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-PrimaryStatus
Specifies that phase 1 authentication sets that match the indicated primary status are renamed.
This parameter describes the overall status of the rule.
-- OK: Specifies that the rule will work as specified.
-- Degraded: Specifies that one or more parts of the rule will not be enforced.
-- Error: Specifies that the computer is unable to use the rule at all.
See the Status and StatusCode fields of the object for more detailed status information.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Status
Specifies that phase 1 authentication sets that match the indicated status are renamed.
This parameter describes the status message for the specified status code value. The status code is a
numerical value that indicates any syntax, parsing, or runtime errors in the rule. This parameter value should
not be modified.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this
parameter is omitted or a value of 0 is entered, then Windows PowerShellr calculates an optimum throttle limit
for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies
only to the current cmdlet, not to the session or to the computer.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-TracePolicyStore []
Indicates that the phase 1 authentication sets that match the indicated policy store are renamed.
This parameter specifies that the name of the source GPO is queried and set to the PolicyStoreSource parameter
value.
Required? false
Position? named
Default value
Accept pipeline input? false
Accept wildcard characters? false
-Confirm []
Prompts you for confirmation before running the cmdlet.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
-WhatIf []
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? false
Position? named
Default value false
Accept pipeline input? false
Accept wildcard characters? false
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetConSecRule[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIKEP1AuthSet[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetMainModeRule[]
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management
Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the
underlying WMI object.
OUTPUTS
None
EXAMPLE 1
PS C:\>Rename-NetIPsecPhase1AuthSet -Name "{ed8384a9-a78b-4d0d-8f3d-eb5615edb4a0}" -NewName "Transport Mode - Home
LAN - Phase 1 Auth Set"
This example renames a phase 1 authorization set so that the unique identifier is descriptive and user friendly.
RELATED LINKS
Online Version: http://go.microsoft.com/fwlink/?LinkId=288205
Copy-NetIPsecPhase1AuthSet
Get-NetIPsecMainModeRule
Get-NetIPsecRule
New-NetIPsecMainModeRule
New-NetIPsecPhase1AuthSet
Open-NetGPO
Save-NetGPO
Remove-NetIPsecQuickModeCryptoSet
Set-NetIPsecPhase1AuthSet
New-GPO