Windows PowerShell command on Get-command Set-ScheduledJob

NAME

Set-ScheduledJob

SYNOPSIS

Changes scheduled jobs.

SYNTAX

Set-ScheduledJob [-InputObject] [-ArgumentList ] [-Authentication {Default |

Basic | Negotiate | NegotiateWithImplicitCredential | Credssp | Digest | Kerberos}] [-Credential ]

[-InitializationScript ] [-MaxResultCount ] [-Name ] [-PassThru] [-RunAs32] [-RunEvery

] [-RunNow] [-ScheduledJobOption ] [-ScriptBlock ] [-Trigger

] []

Set-ScheduledJob [-InputObject] [-ArgumentList ] [-Authentication {Default |

Basic | Negotiate | NegotiateWithImplicitCredential | Credssp | Digest | Kerberos}] [-Credential ]

[-FilePath ] [-InitializationScript ] [-MaxResultCount ] [-Name ] [-PassThru]

[-RunAs32] [-RunEvery ] [-RunNow] [-ScheduledJobOption ] [-Trigger

] []

Set-ScheduledJob [-InputObject] [-ClearExecutionHistory] [-PassThru] []

DESCRIPTION

The Set-ScheduledJob cmdlet changes the properties of scheduled jobs, such as the commands that the jobs run or

the credentials required to run the job. You can also use it to clear the execution history of the scheduled job.

To use this cmdlet, begin by using the Get-ScheduledJob cmdlet to get the scheduled job. Then, pipe the scheduled

job to Set-ScheduledJob or save the job in a variable and use the InputObject parameter to identify the job. Use

the remaining parameters of Set-ScheduledJob to change the job properties or clear the execution history.

Although you can use Set-ScheduledJob to change the triggers and options of a scheduled job, the Add-JobTrigger,

Set-JobTrigger, and Set-ScheduledJobOption cmdlets provide much easier ways to accomplish those tasks. To create a

new scheduled job, use the Register-ScheduledJob cmdlet.

The Trigger parameter of Set-ScheduledJob adds one or more job triggers that start the job. The Trigger parameter

is optional, so you can add triggers when you create the scheduled job, add job triggers later, add the RunNow

parameter to start the job immediately, use the Start-Job cmdlet to start the job immediately at any time, or save

the untriggered scheduled job as a template for other jobs. Set-ScheduledJob is one of a collection of job

scheduling cmdlets in the PSScheduledJob module that is included in Windows PowerShell. For more information about Scheduled Jobs, see the About topics in the PSScheduledJob module. Import the

PSScheduledJob module and then type: `Get-Help about_Scheduled*` or see about_Scheduled_Jobs.

This cmdlet was introduced in Windows PowerShell 3.0.

PARAMETERS

-ArgumentList

Specifies values for the parameters of the script that is specified by the FilePath parameter or for the command that is specified by the ScriptBlock parameter. Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-Authentication

Specifies the mechanism that is used to authenticate the user's credentials. The acceptable values for this parameter are:

- Default

- Basic

- Credssp

- Digest

- Kerberos

- Negotiate

- NegotiateWithImplicitCredential

The default value is Default. For information about the values of this parameter, see AuthenticationMechanism E

numerationhttps://msdn.microsoft.com/en-us/library/system.management.automation.runspaces.authenticationmechani

sm(v=vs.85).aspx in MSDN. Caution: Credential Security Support Provider (CredSSP) authentication, in which the user's credentials are passed to a remote computer to be authenticated, is designed for commands that require authentication on more than one resource, such as accessing a remote network share. This mechanism increases the security risk of the remote operation. If the remote computer is compromised, the credentials that are passed to it can be used to control the network session. Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-ClearExecutionHistory []

Deletes the current execution history and the saved results of the scheduled job. The job execution history and job results are saved with the scheduled job in the

$home\AppData\Local\Microsoft\Windows\PowerShell\ScheduledJobs directory on the computer on which the job is

created. To see the execution history, use the Get-Job cmdlet. To get the job results, use the Receive-Job

cmdlet. This parameter does not affect the events that Task Scheduler writes to the Windows event logs and it does not stop Windows PowerShell from saving job results. To manage the number of job results that are saved, use the MaxResultCount parameter. Required? false Position? named Default value False Accept pipeline input? False Accept wildcard characters? false

-Credential

Specifies a user account that has permission to run the scheduled job. The default is the current user. Type a user name, such as User01 or Domain01\User01, or enter a PSCredential object, such as one from the

Get-Credential cmdlet. If you enter only a user name, you will be prompted for a password.

Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-FilePath

Specifies a script that the scheduled job runs. Enter the path to a .ps1 file on the local computer. To specify default values for the script parameters, use the ArgumentList parameter. Every scheduled job must have either a ScriptBlock or FilePath value. Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-InitializationScript

Specifies the fully qualified path to a Windows PowerShell script (.ps1). The initialization script runs in the session that is created for the background job before the commands that are specified by the ScriptBlock parameter or the script that is specified by the FilePath parameter. You can use the initialization script to configure the session, such as adding files, functions, or aliases, creating directories, or checking for prerequisites. To specify a script that runs the primary job commands, use the FilePath parameter.

If the initialization script generates an error, including a non-terminating error, the current instance of

the scheduled job does not run and its status is Failed. Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-InputObject

Specifies the scheduled job to be changed. Enter a variable that contains ScheduledJobDefinition objects or

type a command or expression that gets ScheduledJobDefinition objects, such as a Get-ScheduledJob command. You

can also pipe a ScheduledJobDefinition object to Set-ScheduledJob .

If you specify multiple scheduled jobs, Set-ScheduledJob makes the same changes to all jobs.

Required? true Position? 0 Default value None Accept pipeline input? True (ByValue) Accept wildcard characters? false

-MaxResultCount

Specifies how many job result entries are maintained for the scheduled job. The default value is 32. Windows PowerShell saves the execution history and results of each triggered instance of the scheduled job on disk. The value of this parameter determines the number of job instance results that are saved for this scheduled job. When the number of job instance results exceeds this value, Windows PowerShell deletes the results of the oldest job instance to make room for the results of the newest job instance. The job execution history and job results are saved in the

$home\AppData\Local\Microsoft\Windows\PowerShell\ScheduledJobs\\Output\ directories on the

computer on which the job is created. To see the execution history, use the Get-Job cmdlet. To get the job

results, use the Receive-Job cmdlet.

The MaxResultCount parameter sets the value of the ExecutionHistoryLength property of the scheduled job. To delete the current execution history and job results, use the ClearExecutionHistory parameter. Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-Name

Specifies a new name for the scheduled job and instances of the scheduled job. The name must be unique on the local computer. To identify the scheduled job to be changed, use the InputObject parameter or pipe a scheduled job from

Get-ScheduledJob to Set-ScheduledJob .

This parameter does not change the names of job instances on disk. It affects only job instances that are started after this command completes. Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-PassThru []

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output. Required? false Position? named Default value False Accept pipeline input? False Accept wildcard characters? false

-RunAs32 []

Runs the scheduled job in a 32-bit process.

Required? false Position? named Default value False Accept pipeline input? False Accept wildcard characters? false

-RunEvery

@{Text=} Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-RunNow []

Starts a job immediately, as soon as the Set-ScheduledJob cmdlet is run. This parameter eliminates the need to

trigger Task Scheduler to run a Windows PowerShell script immediately after registration, and does not require users to create a trigger that specifies a starting date and time. Required? false Position? named Default value False Accept pipeline input? False Accept wildcard characters? false

-ScheduledJobOption

Sets options for the scheduled job. Enter a ScheduledJobOptions object, such as one that you create by using

the New-ScheduledJobOption cmdlet, or a hash table value.

You can set options for a scheduled job when you register the scheduled job or use the Set-ScheduledJobOption

or Set-ScheduledJob cmdlets to set or change options.

Many of the options and their default values determine whether and when a scheduled job runs. Be sure to review these options before scheduling a job. For a description of the scheduled job options, including the

default values, see New-ScheduledJobOption.

To submit a hash table, use the following keys. In the following hash table, the keys are shown with their default values.

`@{# Power SettingsStartIfOnBattery=$False;StopIfGoingOnBattery=$True; WakeToRun=$False; # Idle

SettingsStartIfNotIdle=$False; IdleDuration="00:10:00"; IdleTimeout="01:00:00"; StopIfGoingOffIdle=$True;

RestartOnIdleResume=$False;# Security settingsShowInTaskScheduler=$TrueRunElevated=$False;#

MiscRunWithoutNetwork=$False;DoNotAllowDemandStart=$False;MultipleInstancePolicy=IgnoreNew# Can be IgnoreNew,

Parallel, Queue, StopExisting}` Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-ScriptBlock

Specifies the commands that the scheduled job runs. Enclose the commands in braces ( { } ) to create a script block. To specify default values for command parameters, use the ArgumentList parameter.

Every Register-ScheduledJob command must use either the ScriptBlock or FilePath parameters.

Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false

-Trigger

Specifies the triggers for the scheduled job. Enter one or more ScheduledJobTrigger objects, such as the

objects that the New-JobTrigger cmdlet returns, or a hash table of job trigger keys and values.

A job trigger starts a scheduled job automatically on a one-time or recurring scheduled or when an event

occurs.

Job triggers are optional. You can add a trigger when you create the scheduled job, use the Add-JobTrigger or

Set-ScheduledJob cmdlets to add triggers later, or use the Start-Job cmdlet to start the scheduled job

immediately. You can also create and maintain a scheduled job that has no job triggers. To submit a hash table, use the following keys. `@{Frequency="Once" (or Daily, Weekly, AtStartup, AtLogon);At="3am"` (or any valid time string); `DaysOfWeek="Monday", "Wednesday"` (or any combination of day names); `Interval=2` (or any valid frequency interval); `RandomDelay="30minutes"` (or any valid timespan string); `User="Domain1\User01"` (or any valid user; used only with the AtLogon frequency value) } Required? false Position? named Default value None Accept pipeline input? False Accept wildcard characters? false This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (https:/go.microsoft.com/fwlink/?LinkID=113216).

INPUTS

Microsoft.PowerShell.ScheduledJob.ScheduledJobDefinition

You can pipe scheduled jobs to Set-ScheduledJob .

OUTPUTS

None or Microsoft.PowerShell.ScheduledJob.ScheduledJobDefinition

If you use the Passthru parameter, Set-ScheduledJob returns the scheduled job that was changed. Otherwise,

this cmdlet does not generate any output.

NOTES

Example 1: Change the script that a job runs

PS C:\>Get-ScheduledJob -Name "Inventory"

Id Name Triggers Command Enabled

-- ---- -------- ------- -------

1 Inventory {1} C:\Scripts\Get-Inventory.ps1 True

The second command uses the Get-ScheduledJob cmdlet to get the Inventory scheduled job. A pipeline operator (|)

sends the scheduled job to the Set-ScheduledJob cmdlet. The Set-ScheduledJob cmdlet uses the Script

parameter to specify a new script, Get-FullInventory.ps1. The command uses the *Passthru* parameter to return the

scheduled job after the change.

PS C:\>Get-ScheduledJob -Name "Inventory" | Set-ScheduledJob -FilePath "C:\Scripts\Get-FullInventory.ps1" -Passthru

Id Name Triggers Command Enabled

-- ---- -------- ------- -------

1 Inventory {1} C:\Scripts\Get-FullInventory.ps1 True

This example shows how to change the script that is run in a scheduled job.

The first command uses the Get-ScheduledJob cmdlet to get the Inventory scheduled job. The output shows that the

job runs the Get-Inventory.ps1 script.

This command is not required; it is included only to show the effect of the script change.

Example 2: Delete the execution history of a scheduled job

PS C:\>Get-ScheduledJob BackupArchive | Set-ScheduledJob -ClearExecutionHistory

This command deletes the current execution history and saved job results for the BackupArchive scheduled job.

The command uses the Get-ScheduledJob cmdlet to get the BackupArchive scheduled job. A pipeline operator (|) sends

the job to the Set-ScheduledJob cmdlet to change it. The Set-ScheduledJob cmdlet uses the ClearExecutionHistory

parameter to delete the execution history and saved results. For more information about the execution history and saved job results of scheduled jobs, see about_Scheduled_Jobs.

Example 3: Change scheduled jobs on a remote computer

PS C:\>Invoke-Command -Computer "Server01, Server02" -ScriptBlock {Get-ScheduledJob | Set-ScheduledJob

-InitializationScript \\SrvA\Scripts\SetForRun.ps1}

This command changes the initialization script in all scheduled jobs on the Server01 and Server02 computers.

The command uses the Invoke-Command cmdlet to run a command on the Server01 and Server02 computers.

The remote command begins with a Get-ScheduledJob command that gets all scheduled jobs on the computer. The

scheduled jobs are piped to the Set-ScheduledJob cmdlet, which changes the initialization script to SetForRun.ps1.

Set-ScheduledJob

Set-ScheduledJobOption

Unregister-ScheduledJob